2.0 CU Vacum lines

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

Post Reply
oogamblau
Registered user
Posts: 1
Joined: 14 Oct 2013, 00:35
80-90 Mem No: 12950
Location: Taranaki, New Zealand.

2.0 CU Vacum lines

Post by oogamblau »

I have a 2.0 CU engine with the standard vacum adv/ retard distributer fitted. Aftermarket dual Carbs are fitted also so I have lost vacum capability somewhat.
I have fitted a vacum line from 2 of the carb manifolds to operate the brake booster but have only 1 place to connect the vacum lines to the Dist.
Has anyone used aftermarket Carbs, 40mm Empi, with the original Dist before and if so how was it plumbed up and set?
Any Help appreciated

Gary

Sorry should have said the engine is in a 1981 T25 and is original.

Post Reply