Page 1 of 1

Rear Foglights

Posted: 14 Sep 2018, 15:55
by chris7ian
OK so it's about time I permanently sorted the rear right fog light on my LHD bus rather than the 'wire-soldered-to-a-bulb' number that's currently in there :lol:
I've bought a generic single bulb holder but until I take the rear light off again I don;t if this will be of any use... is there any online 'how to' do this neatly and properly other than buying a complete rhs bulb holder plate? I already have a rhs lens with the correct reflector.
Thanks
C

Re: Rear Foglights

Posted: 14 Sep 2018, 16:19
by 937carrera
Bit confused.

I have just checked the light units from my RHD CU. Both sides have provision for a bulb, so all you need to do is put a bulb in and make sure there is a feed to the terminal on the back of the light unit and both sides should work :?: :?:

Re: Rear Foglights

Posted: 14 Sep 2018, 16:49
by captain Byrne
If they are Hella holders you may need one of these.
Image

Re: Rear Foglights

Posted: 15 Sep 2018, 14:23
by chris7ian
captain Byrne wrote:If they are Hella holders you may need one of these.
Image

BINGO! That'd be better than the bulb holders I bought... don't suppose anyone has any spare to sell?
Once the lamp is off the bus, is it obvious where the wire should connect to the loom?

Re: Rear Foglights

Posted: 20 Sep 2018, 14:11
by chris7ian
Is there a part number on the metal contact by any chance?