Lost the plot where we were with these. Changed a late tank and the readings wherebigbadbob76 wrote: The VR was to allow for different sender resistances but I think we've established that the senders are all the same.
Empty 170 ohms
Full 36 ohms
Moderators: User administrators, Moderators
Lost the plot where we were with these. Changed a late tank and the readings wherebigbadbob76 wrote: The VR was to allow for different sender resistances but I think we've established that the senders are all the same.
bigbadbob76 wrote:Ok... my resistors are, vr1 replaced with 470ohm fixed, R1 is15k, R2 is 8k2.
My sender is a late one.
I could have done but I didn't want to push my luck with a working original ribbon and it was quicker to fit a remote LED near to the ones I already have for the trailer flasher and sidelights.bigbadbob76 wrote:That looks a neat install BH.
Can you solder to the existing tracks on the flexi PCB to fit an extra LED? there should be a resistor slot on the flexi for it too.
bigherb wrote:I could have done but I didn't want to push my luck with a working original ribbon...bigbadbob76 wrote: Can you solder to the existing tracks on the flexi PCB to fit an extra LED?
HelloClaudio ZAMPIERI wrote:Bonjour
Je intéresse par votre travail, c'est fantastique...! Comme vous l'avez compris je suis Francais précisément de La Rochelle et je vous recherche depuis longtemps. Beaucoup de passionnés de VW T3 n'arrive pas à greffer un compte-tours, ou un nouveau Cluster 180€ sur site campervan
nous avons pas les compétences électronique comme vous.
Pouvez vous nous aider à faire un cluster qui remplace la feuille bleu...? Dans mon cas, j'ai un compteurs de MK1 avec 2 jauges et une montre analogique à greffer...je peux vous faire des photos précise
je suis particulier et avec autres passionnés, qui cherche une solution
merci a bientôt
Claudio ZAMPIERI
zampieri.claudio@neuf.fr