Diesel Rev Counter pre-wiring

An alchemy of sparks, copper wire and earth

Moderators: Moderators, User administrators

Diesel Rev Counter pre-wiring

Postby SamsBus2012 » 21 May 2018, 08:39

Morning all. Asking on behalf of a friend who has an '86 Holdsworth Vision with a 1.6TD on a Caravelle conversion. He has no rev counter on the binnacle just a clock but would like to install an aftermarket tacho. Looking on posts on here we have worked out that a link to the "w" terminal on the alternator is required but rather than running a new line from front to back, is anyone aware if there is likely to be any spare lines in the existing loom which could utilised?
Tom (aka Matt)
1986 Hightop with 1.9dg 4spd. The boys call him "Magnus"
User avatar
SamsBus2012
 
Posts: 561
Joined: 15 Aug 2012, 10:24
Location: Devon
80-90 Mem No: 11455

Re: Diesel Rev Counter pre-wiring

Postby 937carrera » 21 May 2018, 10:30

I don't know the answer, but the later petrol WBX have a rev counter signal that serves the DOPS system.

Maybe the wire is still present in the wiring loom for a diesel. It's green and it is visible in the wiring box on the engine bulkhead.

http://forum.club8090.co.uk/viewtopic.php?f=39&t=163521#p8209867
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
User avatar
937carrera
 
Posts: 1939
Joined: 05 Apr 2015, 19:29
Location: N Yorks.
80-90 Mem No: 16333


Return to Electrical & Instrumentation

Who is online

Users browsing this forum: No registered users and 24 guests