I need a chicken switch
Moderators: User administrators, Moderators
- CovKid
- Trader
- Posts: 8409
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: I need a chicken switch
Just bear in mind, the fan is pulling a fair few amps when its on flat out speed which is why you need a switch that can handle it. For headroom, 20 amps would seem reasonable although mine is only 10 amps and its lasted 5-6 years so perhaps the maximum rating of the switch is actually much higher than marked.
The alternative would be a heavy duty toggle switch or a relay attached to a lesser switch but that then makes it far more complicated than it need be. Much as I like relays, they do introduce an additional failure point that wasn't there before. Keep it simple I say. It is after all, an emergency switch.
As always though, if you do overheat, check your water levels. If you're boiling dry, the switch won't help.
Have I ever used mine? Yep.
By the way, this is a really funky switch akin to that found on aircraft - 20amp too. https://www.ebay.co.uk/itm/DC-12V-20A-C ... Sw3UZa2Zi6" onclick="window.open(this.href);return false;
The alternative would be a heavy duty toggle switch or a relay attached to a lesser switch but that then makes it far more complicated than it need be. Much as I like relays, they do introduce an additional failure point that wasn't there before. Keep it simple I say. It is after all, an emergency switch.
As always though, if you do overheat, check your water levels. If you're boiling dry, the switch won't help.
Have I ever used mine? Yep.
By the way, this is a really funky switch akin to that found on aircraft - 20amp too. https://www.ebay.co.uk/itm/DC-12V-20A-C ... Sw3UZa2Zi6" onclick="window.open(this.href);return false;
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
- ermie571
- Registered user
- Posts: 4970
- Joined: 11 Oct 2005, 11:11
- 80-90 Mem No: 2129
- Location: Minster-on-Sea, Kent: Member 2129 07784052288
Re: I need a chicken switch
Thanks Cov Kid.
All useful and noted
Em
x
All useful and noted
Em
x
2.1 DJ 1990 Caravelle (died and gone to heaven)
2.0 AGG (1997 ish) 1984 transporter LPG
2.0 AGG (1997 ish) 1984 transporter LPG
- ermie571
- Registered user
- Posts: 4970
- Joined: 11 Oct 2005, 11:11
- 80-90 Mem No: 2129
- Location: Minster-on-Sea, Kent: Member 2129 07784052288
Re: I need a chicken switch
crazyhorse wrote:Im going to jump in on this also. I was stuck in traffic on a hill the other day. Needle was climbing up, got so paranoid that I put the heater on hot and switched the blower on. The fan did come on the first stage but just to be sure. I was sweating buckets but the needle went down so this will be good to do. Ordered a 30amp switch and 5m of 2.5 single core wire. Have the connectors. Will have to wait till the switch comes from China.
Sounds easy as I was over complicating things.
Cut the Red/White ( power) wire and and re join with the wago 222. New wire to Switch.
Cut the red/blue wire and do the same.
I have ordered a Switch with a light, so that has an earth connection so presumambly I need to run a earth wire from the new switch to a suitable place.
If I do all the above, I should be able to hit the button, then the high speed fan will come on with a red light to tell me that I have done so. Hit the switch off, fan stops and light goes off. What could possibly go wrong.
ermie571 please let me know how you get on
Wilko. the cool funcky looking connectors from WAGO arrived today, and I will sort switch and cable too.
I'm going in....wish me luck! The van is quiverring at the sight of me approaching with wire cutters.... Do they feel pain??!!
Em
x
2.1 DJ 1990 Caravelle (died and gone to heaven)
2.0 AGG (1997 ish) 1984 transporter LPG
2.0 AGG (1997 ish) 1984 transporter LPG
- CovKid
- Trader
- Posts: 8409
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: I need a chicken switch
They don't if you cough very loudly when you make the snip.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
- slowcoach
- Registered user
- Posts: 1580
- Joined: 06 May 2010, 10:23
- 80-90 Mem No: 8892
- Location: West Yorkshire
- Contact:
Re: I need a chicken switch
Oh, I think they do, they do :'(
===================
1984 TRAKKA Conversion Subaru EJ20 5 Speed
1984 TRAKKA Conversion Subaru EJ20 5 Speed
- Oldiebut goodie
- Registered user
- Posts: 7294
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: I need a chicken switch
That was a bit drastic just to retrieve that 5p piece that you dropped in there!
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
- Registered user
- Posts: 857
- Joined: 21 Aug 2013, 15:01
- 80-90 Mem No: 15202
- Location: Llantwit Major, Bro Morganwg, South wales
Re: I need a chicken switch
ermie571 wrote:crazyhorse wrote:Im going to jump in on this also. I was stuck in traffic on a hill the other day. Needle was climbing up, got so paranoid that I put the heater on hot and switched the blower on. The fan did come on the first stage but just to be sure. I was sweating buckets but the needle went down so this will be good to do. Ordered a 30amp switch and 5m of 2.5 single core wire. Have the connectors. Will have to wait till the switch comes from China.
Sounds easy as I was over complicating things.
Cut the Red/White ( power) wire and and re join with the wago 222. New wire to Switch.
Cut the red/blue wire and do the same.
I have ordered a Switch with a light, so that has an earth connection so presumambly I need to run a earth wire from the new switch to a suitable place.
If I do all the above, I should be able to hit the button, then the high speed fan will come on with a red light to tell me that I have done so. Hit the switch off, fan stops and light goes off. What could possibly go wrong.
ermie571 please let me know how you get on
Wilko. the cool funcky looking connectors from WAGO arrived today, and I will sort switch and cable too.
I'm going in....wish me luck! The van is quiverring at the sight of me approaching with wire cutters.... Do they feel pain??!!
Em
x
May the force of the snippers be with you
-
- Registered user
- Posts: 165
- Joined: 30 Aug 2016, 20:26
- 80-90 Mem No: 0
Re: I need a chicken switch
Anyone fancy do'in a Fag Packet drawing using wago 222 connectors and switch etc just to be belt and braces before I get my snips out.
Drawings always speak louder than words to me xx
Sent from my SM-G955F using Tapatalk
Drawings always speak louder than words to me xx
Sent from my SM-G955F using Tapatalk
1987 Hightop with Subaru EJ25 Conversion
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: I need a chicken switch
izzybarnard wrote:Anyone fancy do'in a Fag Packet drawing using wago 222 connectors and switch etc just to be belt and braces before I get my snips out.
Drawings always speak louder than words to me xx
Sent from my SM-G955F using Tapatalk
Sorry I do this stuff every day and I forget it's not obvious to everybody
Here is a guide for a late van RHD 2 speed fan.....
You are adding a switch here between red/white and red/blue this essentially does the same job as the 102 deg C switch ( stage 2) in F18 which is your rad temp switch.
As you can see it only triggers a relay but best to use a 30A switch to make sure it's a good one,.
The circuit has a 30A fuse so if any of the wiring was to short there the wires at 1.5mm2 and 30A switch can handle it and blow the fuse before melting.
you also need 30A connectors which is why I reccomend Wago 222, pretty much idiot proof.
chicken switch wiring diagram by Paul_Barr, on Flickr
drop down glovebox by bending tabs
P1100280 by Paul_Barr, on Flickr
remove fusebox screw and lift fuse box off pegs
P1100281 by Paul_Barr, on Flickr
chicken switch fusebox by Paul_Barr, on Flickr
locate red/white and red blue wires, cut them strip then and rejoin with wago 222 connectors, then add 1.5mm2 switch wires to a 30A switch located in a suitable position.
Chicken switch by Paul_Barr, on Flickr
P1100279 by Paul_Barr, on Flickr
Last edited by itchyfeet on 09 May 2018, 19:28, edited 2 times in total.
-
- Registered user
- Posts: 165
- Joined: 30 Aug 2016, 20:26
- 80-90 Mem No: 0
Re: I need a chicken switch
Itchyfeet
Thats bloody marvellous.
Cheers cheers
Sent from my SM-G955F using Tapatalk
Thats bloody marvellous.
Cheers cheers
Sent from my SM-G955F using Tapatalk
1987 Hightop with Subaru EJ25 Conversion
-
- Registered user
- Posts: 857
- Joined: 21 Aug 2013, 15:01
- 80-90 Mem No: 15202
- Location: Llantwit Major, Bro Morganwg, South wales
Re: I need a chicken switch
Great stuff. Thanks for the detailed info
- CovKid
- Trader
- Posts: 8409
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: I need a chicken switch
If you use the switch to operate the relay already fitted for high speed fan (above earth crowns if you look up), you only need a 1 amp switch as relay coil current draw is well under 250 mA
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: I need a chicken switch
CovKid wrote:If you use the switch to operate the relay already fitted for high speed fan (above earth crowns if you look up), you only need a 1 amp switch as relay coil current draw is well under 250 mA
Good practice to have the wiring capable of taking the fuse rating, if not a high current short to ground makes a fire before the fuse blows.
In the late van thats a 30A fuse or you have to add another inline fuse.
Persoanlly I prefer chunky switches and wiring far more robust.
Here is a guide for a late van RHD 2 speed fan.....
You are adding a switch here between red/white and red/blue this essentially does the same job as the 102 deg C switch ( stage 2) in F18 which is your rad temp switch.
As you can see it only triggers a relay but best to use a 30A switch to make sure it's a good one,.
The circuit has a 30A fuse so if any of the wiring was to short there the wires at 1.5mm2 and 30A switch can handle it and blow the fuse before melting.
you also need 30A connectors which is why I reccomend Wago 222, pretty much idiot proof.
- CovKid
- Trader
- Posts: 8409
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: I need a chicken switch
Would agree on power side. On switch side, not needed. 8 amp would be fine for that circuit - if done that way. There are a few ways to wire a chicken switch though.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
- ermie571
- Registered user
- Posts: 4970
- Joined: 11 Oct 2005, 11:11
- 80-90 Mem No: 2129
- Location: Minster-on-Sea, Kent: Member 2129 07784052288
Re: I need a chicken switch
Ive got the early fuse box in one, and the late in the other two...
By the third one I should have the hang of it!!
By the third one I should have the hang of it!!
2.1 DJ 1990 Caravelle (died and gone to heaven)
2.0 AGG (1997 ish) 1984 transporter LPG
2.0 AGG (1997 ish) 1984 transporter LPG