Starts then stops......

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

User avatar
skysurfin09
Registered user
Posts: 510
Joined: 09 Oct 2009, 15:38
80-90 Mem No: 2820
Location: ludgershall wiltshire

Re: Starts then stops......

Post by skysurfin09 »

skysurfin09 wrote:
ajsimmo wrote:No need to change the ignition switch just yet, test it first. Put a bridging wire from the battery +ve post in the black box to the 15 terminal on the coil (black wire - that's the live feed from the ignition switch). If it runs ok now, it's the switch or wiring. If not, it's not.

Sent from my ONEPLUS A3003 using Tapatalk

Cheers mate, I give that a go thanks. Rob

Checked and the result is the same as before , so at least I know that the switch is good. Thanks AJ :ok
'89 2.1 injected (Digijet)...travelling in hope over adversity

Post Reply