No spark , digifant system

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

No spark , digifant system

Postby stove » 24 Oct 2017, 17:59

Hi folks,
My MV engined auto van has just refused to start.
Pulled a plug lead off , put a spare plug in the cap , placed it on the crankcase and got the wife to crank it over. No spark . Placed a meter between centre wire to hall sender and pos , cranked it over and volts fluctuated . Changed coil , swapped king lead for plug lead. Still no spark . Checked for voltage on outer wires to hall sender and continuaty between all three wires distributer to ecu, all okay. Also battery voltage at pin 13 and 14 at ecu , Any ideas.
Regards , Steve Heyes,,
User avatar
stove
 
Posts: 17
Joined: 07 Oct 2009, 09:59
Location: Woolton, Liverpool
80-90 Mem No: 7492

Return to Electrical & Instrumentation

Who is online

Users browsing this forum: No registered users and 11 guests