I need to remove my heater control. But can’t work out how. It looks as though the dial has to be removed first but it does not pull off. Can’t see any screws holding the cover in place. The cover is loose on the left but firmly in place on the right.
Help please[SMILING FACE WITH SMILING EYES]
Sent from my iPad using Tapatalk
Propex Heater Control unit
Moderators: User administrators, Moderators
Propex Heater Control unit
1991 Auto Sleeper Trident High Top
Water Cooled 1.9 Petrol
Water Cooled 1.9 Petrol
- Titus A Duxass
- Registered user
- Posts: 5778
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: Propex Heater Control unit
Going from memory.
Carefully prise the control knob off.
Remove the two rubber bungs and remove the screws.
Carefully prise the control knob off.
Remove the two rubber bungs and remove the screws.
VW T3 GTi Camper 2,0l
- Oldiebut goodie
- Registered user
- Posts: 7260
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Propex Heater Control unit
As above ^^^^^ prise the dial off - don't do it from just one side use 2 prisers otherwise the shaft can fracture. One or two screws underneath.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
Re: Propex Heater Control unit
Perfect. I’m prone to breaking things so was too cautious and using 2 screw drivers worked well.
I was hoping to find a hole behind so I could feed some wire through. But alas no large hole. So back to square one.
Am fitting some mini LED’s along the underside of the boxed in section. Can’t get access to this far corner.
Sent from my iPad using Tapatalk
I was hoping to find a hole behind so I could feed some wire through. But alas no large hole. So back to square one.
Am fitting some mini LED’s along the underside of the boxed in section. Can’t get access to this far corner.
Sent from my iPad using Tapatalk
1991 Auto Sleeper Trident High Top
Water Cooled 1.9 Petrol
Water Cooled 1.9 Petrol
-
- Registered user
- Posts: 487
- Joined: 03 Oct 2012, 19:24
- 80-90 Mem No: 12639
- Location: South Bucks
Re: Propex Heater Control unit
Any help??JonathanR wrote:Perfect. I’m prone to breaking things so was too cautious and using 2 screw drivers worked well.
I was hoping to find a hole behind so I could feed some wire through. But alas no large hole. So back to square one.
Am fitting some mini LED’s along the underside of the boxed in section. Can’t get access to this far corner.
Sent from my iPad using Tapatalk
Sent from my SM-T580 using Tapatalk
1982 2 litre CU Auto Devon Moonraker called Brian
Re: Propex Heater Control unit
Thanks petethefeet. All dismantled and put back together again.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
1991 Auto Sleeper Trident High Top
Water Cooled 1.9 Petrol
Water Cooled 1.9 Petrol