Using rust buster 4941

Thin bits of metal and bright blue light. Including glass & trim.

Moderators: User administrators, Moderators

Post Reply
freckvan1
Registered user
Posts: 227
Joined: 18 Jul 2010, 19:00
80-90 Mem No: 8492
Location: freckleton, near preston, lancashire

Using rust buster 4941

Post by freckvan1 »

Morning All,

Well I’m hoping someone will confirm I’ve done the right thing !

Cleared all rust from O/S Snorkel Box , Vactan, two coats Rustbuster Epoxy Primer 421 and then liberally applied Rustbuster 4941 Underbody Wax .

Is this ok , as just seen comments on putting a top coat before 4941 Underseal . Rustbuster says should be Vactan, Primer, Top Coat, 121, then 4941 .

Only done under the van so far and intend to top coat the interior of Snorkel Box followed by wax .

I assumed that with getting back to clean metal, Vactan, then two coats of Epoxy 421, followed by Dinitrol 4941 Underbody Wax was ok . .

I can understand need for a top coat if lower down like sills,etc., but Snorkel Box is pretty high away from ground .

Anyway, just hoping someone will confirm what I’ve done is ok. , can’t face taking the bloody wax off and starting all over again !
Thanks,
Chris
1984 1,9DG. W/C

freckvan1
Registered user
Posts: 227
Joined: 18 Jul 2010, 19:00
80-90 Mem No: 8492
Location: freckleton, near preston, lancashire

Re: Using rust buster 4941

Post by freckvan1 »

Well , anybody there? :shock:
1984 1,9DG. W/C

Post Reply