Page 1 of 1
Wheel colour
Posted: 12 Jun 2019, 11:00
by Sir Brixalot
I've got an auto sleeper in l90d and maroon stripes. My wheels look shabby and need a refurb. It crossed my mind to match the wheels to the stripe. What do you think, never seen it done but that could be because it will look rubbish. There's a good chance that I'm going to sell I'm going to miss the summer camping. They're penta in style so maroon, white or standard silver-what do you reckon?
Re: Wheel colour
Posted: 12 Jun 2019, 11:58
by itchyfeet
Silver.
especially if you are selling it.
Re: Wheel colour
Posted: 12 Jun 2019, 13:04
by clift_d
We galvanised and then powdercoated our wheels with RAL 9006 White Aluminium. It's not really intended as a decorative finish since it is based on aluminium particles in a binder, and so the tolerance of the final appearance cannot be controlled tightly enough to allow proper colour matching, but it's got a bit more life than a flat grey and it's a little bit more understated than any of the silver metallics.
Re: Wheel colour
Posted: 12 Jun 2019, 13:43
by 300CE
Are they standard wheels or alloys?
Re: Wheel colour
Posted: 12 Jun 2019, 18:41
by Sir Brixalot
Alloys with plastic centres - Stilautos - bought them from a member on here. 15" similar in style to the ones in the link!
https://www.r3vlimited.com/board/attach ... 1132447806
Re: Wheel colour
Posted: 12 Jun 2019, 20:31
by clift_d
Hopefully they have the correct 5 x 112 bolt holes and not four like the ones pictured.
Re: Wheel colour
Posted: 12 Jun 2019, 20:39
by TommymacT2589
clift_d wrote:We galvanised and then powdercoated our wheels with RAL 9006 White Aluminium. It's not really intended as a decorative finish since it is based on aluminium particles in a binder, and so the tolerance of the final appearance cannot be controlled tightly enough to allow proper colour matching, but it's got a bit more life than a flat grey and it's a little bit more understated than any of the silver metallics.
Smart, love it [THUMBS UP SIGN]
Sent from my SM-G973F using Tapatalk
Re: Wheel colour
Posted: 12 Jun 2019, 22:15
by R0B
Silver
Re: Wheel colour
Posted: 13 Jun 2019, 07:25
by patrickpawsey
clift_d wrote:We galvanised and then powdercoated our wheels with RAL 9006 White Aluminium. It's not really intended as a decorative finish since it is based on aluminium particles in a binder, and so the tolerance of the final appearance cannot be controlled tightly enough to allow proper colour matching, but it's got a bit more life than a flat grey and it's a little bit more understated than any of the silver metallics.
That's really nice
Sent from my ONEPLUS A3003 using Tapatalk
Re: Wheel colour
Posted: 13 Jun 2019, 11:02
by Sir Brixalot
clift_d wrote:Hopefully they have the correct 5 x 112 bolt holes and not four like the ones pictured.
Managed to get two bolts on -that'll do
Re: Wheel colour
Posted: 13 Jun 2019, 11:48
by 300CE
They're not much different to my Sir Brix:
Untitled by
Justin C, on Flickr
If it were me, i'd go black centre with a silver/polished lip on a white bus:
Wheel 1 by
Justin C, on Flickr
Re: Wheel colour
Posted: 13 Jun 2019, 17:14
by Sir Brixalot
Like that. Is it sprayed or powder coated
Re: Wheel colour
Posted: 13 Jun 2019, 18:44
by 300CE
Sir Brixalot wrote:Like that. Is it sprayed or powder coated
They’re sprayed mate - Can’t remember what colour now, but also decided to go with a painted lip in silver instead of polished.
That picture is 3 years after i got them refurbed - I use Sonax wheel sealant which stops the brake dust eating into the paint.