Does anyone know.....
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 1672
- Joined: 12 Oct 2005, 11:14
- 80-90 Mem No: 1342
- Location: Wolverhampton.
Does anyone know.....
.........if all factory sliding doors have the same size windows?
I've and early van, 1984, with early sliding door, it was originally a panel van so has the aftermarket windows fitted.
I've now sourced an early factory window sliding door to replace my rotten one but it came without glass, which my window obviously won't fit.
I'm looking at maybe getting an opening/sliding window but want to know if all factory windows are the same, I know SA one's are bigger but is there any difference between early and late one's?
Cheers in advance.
I've and early van, 1984, with early sliding door, it was originally a panel van so has the aftermarket windows fitted.
I've now sourced an early factory window sliding door to replace my rotten one but it came without glass, which my window obviously won't fit.
I'm looking at maybe getting an opening/sliding window but want to know if all factory windows are the same, I know SA one's are bigger but is there any difference between early and late one's?
Cheers in advance.
2.1 DJ running on carb and LPG.
-
- Registered user
- Posts: 633
- Joined: 12 Aug 2010, 06:57
- 80-90 Mem No: 8608
- Location: Fairly close to Hinckley
Re: Does anyone know.....
Ive got a sliding window from a late door laying around somewhere, could do with a slap of paint but is serviceable, I have the rubber too its yours for free if you want it as I am having a clear out
“A sure cure for seasickness is to sit under a tree.” ― Spike Milligan
1988 1.9 DG
1988 1.9 DG
-
- Registered user
- Posts: 1672
- Joined: 12 Oct 2005, 11:14
- 80-90 Mem No: 1342
- Location: Wolverhampton.
Re: Does anyone know.....
That's a lovely offer, cheers.
Could you measure it for me when you get chance as I've a sneaky feeling later sliding door windows were a bit smaller.
No rush, whenever you get a minute.
Regards.
Could you measure it for me when you get chance as I've a sneaky feeling later sliding door windows were a bit smaller.
No rush, whenever you get a minute.
Regards.
2.1 DJ running on carb and LPG.
-
- Registered user
- Posts: 633
- Joined: 12 Aug 2010, 06:57
- 80-90 Mem No: 8608
- Location: Fairly close to Hinckley
Re: Does anyone know.....
No worries
106.5 wide
42.8 high
Pretty odd sizes, these are the dimensions of the complete window without the rubber
106.5 wide
42.8 high
Pretty odd sizes, these are the dimensions of the complete window without the rubber
“A sure cure for seasickness is to sit under a tree.” ― Spike Milligan
1988 1.9 DG
1988 1.9 DG
- Aidan
- Trader
- Posts: 6556
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Does anyone know.....
I think early sliding door glass is same as opposite side 428mm x 1084mm
late sliding door glass is definitely shorter than opposite 428mm x 1052mm
change over 1st Sept 1984 build date
late sliding door glass is definitely shorter than opposite 428mm x 1052mm
change over 1st Sept 1984 build date
Re: Does anyone know.....
The factory slider door window for early van is 1073 x 419. Late is 1043 x 419 that's the complete size before the rubber is fitted.
1992 red lle 2.2 subaru 1990 rhd caravelle 2.2 subaru 1986 california import vanagon
-
- Registered user
- Posts: 1672
- Joined: 12 Oct 2005, 11:14
- 80-90 Mem No: 1342
- Location: Wolverhampton.
Re: Does anyone know.....
Thanks lads, as stated they are different so unfortunately your kind offer of a window won't be of any use.
So, all I need is a middle factory window from any year or an early slider specific?
Thanks again.
So, all I need is a middle factory window from any year or an early slider specific?
Thanks again.
2.1 DJ running on carb and LPG.
- Ant-t
- Registered user
- Posts: 1955
- Joined: 05 Jan 2015, 14:17
- 80-90 Mem No: 14390
- Location: West Sussex
Re: Does anyone know.....
I think you'll need an early slider specific window. I replaced my middle, non slider side, window last year and it was quite a bit shorter than my early sliding door window. I couldn't get a sliding window to fit my early sliding door, they were all too short, so I just replaced the glass in the end.
1983 DG Kamper 2
-
- Registered user
- Posts: 1672
- Joined: 12 Oct 2005, 11:14
- 80-90 Mem No: 1342
- Location: Wolverhampton.
Re: Does anyone know.....
Ant-t wrote:I think you'll need an early slider specific window. I replaced my middle, non slider side, window last year and it was quite a bit shorter than my early sliding door window. I couldn't get a sliding window to fit my early sliding door, they were all too short, so I just replaced the glass in the end.
The plot thickens, all adverts I see for Middle windows say they fit any non-slider side 80-92 and early sliding doors?
Has your van got factory windows all round then?
So what you're saying is your early van middle window (opposite slider) is shorter than the sliding door side?
Because mine is a converted panel van I can't compare the Two sides.
If that's the case then I'll need to be very careful, much appreciated.
2.1 DJ running on carb and LPG.
- Ant-t
- Registered user
- Posts: 1955
- Joined: 05 Jan 2015, 14:17
- 80-90 Mem No: 14390
- Location: West Sussex
Re: Does anyone know.....
Yes my early van has factory windows and the middle, none slider, window is definitely smaller. Bought a sliding window for my slider and it was too short.
1983 DG Kamper 2
Re: Does anyone know.....
Your van isn't a factory window van if the window opposite the sliding door is smaller than the sliding door window. The pre 85 van middle windows are the same size both sides, the later van has a smaller sliding door window. So if an owner of an early rhd factory window van needs a sliding door window they need either a window from an early rhd sliding door or a left side window from any year of a lhd van because that will always be the larger window. Remember you cant use a sliding window from the right side of a van because the glass and the window catch will be the wrong way .Ant-t wrote:Yes my early van has factory windows and the middle, none slider, window is definitely smaller. Bought a sliding window for my slider and it was too short.
1992 red lle 2.2 subaru 1990 rhd caravelle 2.2 subaru 1986 california import vanagon
-
- Registered user
- Posts: 1672
- Joined: 12 Oct 2005, 11:14
- 80-90 Mem No: 1342
- Location: Wolverhampton.
Re: Does anyone know.....
multisi wrote:Your van isn't a factory window van if the window opposite the sliding door is smaller than the sliding door window. The pre 85 van middle windows are the same size both sides, the later van has a smaller sliding door window. So if an owner of an early rhd factory window van needs a sliding door window they need either a window from an early rhd sliding door or a left side window from any year of a lhd van because that will always be the larger window. Remember you cant use a sliding window from the right side of a van because the glass and the window catch will be the wrong way .Ant-t wrote:Yes my early van has factory windows and the middle, none slider, window is definitely smaller. Bought a sliding window for my slider and it was too short.
That's what I was led to believe, cheers.
2.1 DJ running on carb and LPG.