Believe this is from an early 81/82 camper.
Advice on fitting it correctly would be grand.
Slightly confused as to how the brackets/arms in the photo work with the frame itself?
Anyone got one/fitted one?
Thanks
How does this Rock+Roll bed fit?
Moderators: User administrators, Moderators
How does this Rock+Roll bed fit?
- Attachments
-
- IMG_20190225_172509.jpg (80.13 KiB) Viewed 2171 times
-
- IMG_20190225_172457.jpg (51.33 KiB) Viewed 2171 times
-
- IMG_20190225_172443.jpg (53.26 KiB) Viewed 2171 times
-
- Registered user
- Posts: 293
- Joined: 04 Sep 2012, 21:25
- 80-90 Mem No: 11532
- Location: Wiltshire
Re: How does this Rock+Roll bed fit?
So in the top picture the two arms that form an A with two l shaped plates on are the rock and roll bit. The base board bolts to one set and the back board to the other pair. As you push the A front to back the two paddles should go from in line, lay down position, to right angle ish to each other, sat upright.
The two boob shaped brackets go on the base board, when the seat is upright the base will be lower and they go inside the box. When in the lay down position they will rest on the front edge of the base box.
Bit like this one https://goo.gl/images/ttM7Y1
The two boob shaped brackets go on the base board, when the seat is upright the base will be lower and they go inside the box. When in the lay down position they will rest on the front edge of the base box.
Bit like this one https://goo.gl/images/ttM7Y1
Greta: 85’ LHD 2.5L Subaru 14in Syncro
http://forum.club8090.co.uk/viewtopic.php?t=165773
http://forum.club8090.co.uk/viewtopic.php?t=165773
- ZsZ
- Registered user
- Posts: 1411
- Joined: 12 Feb 2009, 16:28
- 80-90 Mem No: 14899
- Location: Budapest, Hungary
- Contact:
Re: How does this Rock+Roll bed fit?
looks like a homebrew frame for Reimo hinges
You miss the two plywood boards of the base and the backrest
You miss the two plywood boards of the base and the backrest
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
Re: How does this Rock+Roll bed fit?
ZsZ wrote:looks like a homebrew frame for Reimo hinges
You miss the two plywood boards of the base and the backrest
Should work with making up my own seat/back boards and fix to van though!
- ZsZ
- Registered user
- Posts: 1411
- Joined: 12 Feb 2009, 16:28
- 80-90 Mem No: 14899
- Location: Budapest, Hungary
- Contact:
Re: How does this Rock+Roll bed fit?
yes, but you have to figure out the position and sizes o the boards.
this is the Reimo pdf with full width sizes: https://t3-infos.de/images/Reimo_Klappsitzbank.pdf" onclick="window.open(this.href);return false;
and this is for a narrow one:
this is the Reimo pdf with full width sizes: https://t3-infos.de/images/Reimo_Klappsitzbank.pdf" onclick="window.open(this.href);return false;
and this is for a narrow one:
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
Re: How does this Rock+Roll bed fit?
ZsZ wrote:yes, but you have to figure out the position and sizes o the boards.
this is the Reimo pdf with full width sizes: https://t3-infos.de/images/Reimo_Klappsitzbank.pdf" onclick="window.open(this.href);return false;
and this is for a narrow one:
Thank you, very helpful, I think I will make up a prototype from off cuts to get it right then do properly
-
- Registered user
- Posts: 293
- Joined: 04 Sep 2012, 21:25
- 80-90 Mem No: 11532
- Location: Wiltshire
Re: How does this Rock+Roll bed fit?
Rtmgsn wrote:ZsZ wrote:yes, but you have to figure out the position and sizes o the boards.
this is the Reimo pdf with full width sizes: https://t3-infos.de/images/Reimo_Klappsitzbank.pdf" onclick="window.open(this.href);return false;
and this is for a narrow one:
Thank you, very helpful, I think I will make up a prototype from off cuts to get it right then do properly
Use cardboard. Big cardboard boxes are cheaper than any wood that size.
Greta: 85’ LHD 2.5L Subaru 14in Syncro
http://forum.club8090.co.uk/viewtopic.php?t=165773
http://forum.club8090.co.uk/viewtopic.php?t=165773
-
- Trader
- Posts: 2591
- Joined: 27 May 2009, 18:56
- 80-90 Mem No: 16628
- Location: hayling island
Re: How does this Rock+Roll bed fit?
You only need to make 2 rectangular board, the width is simply the width between the hinges, the length of each board can be calculated by what length of bed you require minus the length of the space over the engine bay, the above dimensions are unlikely to be correct for your bed
Re: How does this Rock+Roll bed fit?
davidoft1 wrote:You only need to make 2 rectangular board, the width is simply the width between the hinges, the length of each board can be calculated by what length of bed you require minus the length of the space over the engine bay, the above dimensions are unlikely to be correct for your bed
Nice one, thanks for the advice, will give this a crack next week