Page 2 of 2
Re: foam / sponge in bottom of front A pillar ?
Posted: 07 Apr 2019, 19:46
by lloydy
did you bin the original stuff?
Re: foam / sponge in bottom of front A pillar ?
Posted: 08 Apr 2019, 05:42
by Titus A Duxass
ZsZ wrote:
Yes I did it.
you can bend those feet a bit and use a long screwdriver to screw the self tapers in.
Thanks mate, did zou take the doors off to fit them_
Re: foam / sponge in bottom of front A pillar ?
Posted: 08 Apr 2019, 09:45
by ZsZ
Titus A Duxass wrote:ZsZ wrote:
Yes I did it.
you can bend those feet a bit and use a long screwdriver to screw the self tapers in.
Thanks mate, did zou take the doors off to fit them_
Yes, without that you cannot reach the screws
Re: foam / sponge in bottom of front A pillar ?
Posted: 08 Apr 2019, 22:34
by Just_Kitt
lloydy wrote:did you bin the original stuff?
Yer I did, it was soaked through and growing green stuff on one side (had started rusting the pillar too) and I wasn't going to risk the same happening on the other side so I ripped that out too!
Re: foam / sponge in bottom of front A pillar ?
Posted: 13 Apr 2019, 07:53
by lloydy
Shame , I would have had it. I have the original one side and some closed cell foam the other.
Re: foam / sponge in bottom of front A pillar ?
Posted: 27 Apr 2019, 21:48
by Just_Kitt
It wasn't in a great state either - and I've found the new stuff to be just as good at reducing noise!