Page 2 of 2
Re: Repairing step
Posted: 02 Jul 2018, 16:32
by Gordo89
No lessons just practice and patience.
Re: Repairing step
Posted: 10 Jul 2018, 20:10
by Sir Brixalot
multisi wrote:Cut out the rot then repair with aluminium mesh and fiberglass. Worked well for me and was inspected by local authorities.
I think its a goern cleaning off the rust it's not as bad as it looked and can wait. Did you put mesh underneath step covered with filler then matting on top?
Re: Repairing step
Posted: 10 Jul 2018, 20:21
by multisi
Cut the mesh an inch bigger than the hole. Put some fiberglass around the edge of the hole so the mesh sits on the wet fiberglass then add some layers on top. I didn't fill or paint my repairs but did put the holes in so the rubber went back on.
Re: Repairing step
Posted: 10 Jul 2018, 20:26
by Sir Brixalot
Thanks for tip