Am replacing the seal channel in its entirety.
Lower replaced already.
Have a question, can anyone measure the distance from the upper edge of the seal channel to the edge of the roof.
I know it’s pretty vague, and the rubber seal will cover most errors, just want it to be something like.
The first time I forgot to take measurements..!
Mind you, as usual, underestimated the amount of rot to cut out..!!
Thanks
Rear Tailgate seal channel
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 1810
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rear Tailgate seal channel
That’s with the end of the rule in the deepest part of the channel.
i.e. just on the other side of this angle
Looks like it’s shallower at the ends, a wee bit anyway
Sent from my iPhone using Tapatalk
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
-
- Registered user
- Posts: 1810
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rear Tailgate seal channel
At the corner...
By the hinge
In the centre
Sent from my iPhone using Tapatalk
By the hinge
In the centre
Sent from my iPhone using Tapatalk
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
-
- Registered user
- Posts: 519
- Joined: 31 Dec 2016, 18:28
- 80-90 Mem No: 15962
- Location: Dinnington, South Yorkshire
Re: Rear Tailgate seal channel
Perfect..
Thanks a lot!!
Thanks a lot!!
-
- Registered user
- Posts: 1810
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rear Tailgate seal channel
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.