How do we pop these little suckers off?
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 87
- Joined: 27 Jun 2014, 15:03
- 80-90 Mem No: 0
How do we pop these little suckers off?
How do we pop The little suckers off? Just bought two shiny new ones and I’ve been trying for 10 minutes with a screwdriver to no avail lol
Cheers in advance you knowledgable people [FACE SAVOURING DELICIOUS FOOD]
Sent from my iPhone using Tapatalk
Cheers in advance you knowledgable people [FACE SAVOURING DELICIOUS FOOD]
Sent from my iPhone using Tapatalk
-
- Registered user
- Posts: 87
- Joined: 27 Jun 2014, 15:03
- 80-90 Mem No: 0
How do we pop these little suckers off?
Haha never knew that was what that emoji was.... I was pulling this face while jabbing with said screwdriver
:-p
Sent from my iPhone using Tapatalk
:-p
Sent from my iPhone using Tapatalk
Re: How do we pop these little suckers off?
First of all have a
Look at the new cap ,is there a thread for it to screw on/off or is it a snap fit ,if it is a snap fit then I think you need to remove the handle from inside. There is a tiny roll pin which will need a flat ended parallel punch slightly smaller than the pin to remove,being very careful not break the glass ! There is then a thin wavy washer,then
I think you will then be able to gently push the spindle outward from the glass ,again being careful not to break the glass or maybe the spindle just falls out.
Then you can maybe grip the spindle in a soft jaw vice to lever the cap off or make a cut in it to weaken it before levering it off.
Hope that helps .
Maybe someone else can confirm this is what you need to do.
Look at the new cap ,is there a thread for it to screw on/off or is it a snap fit ,if it is a snap fit then I think you need to remove the handle from inside. There is a tiny roll pin which will need a flat ended parallel punch slightly smaller than the pin to remove,being very careful not break the glass ! There is then a thin wavy washer,then
I think you will then be able to gently push the spindle outward from the glass ,again being careful not to break the glass or maybe the spindle just falls out.
Then you can maybe grip the spindle in a soft jaw vice to lever the cap off or make a cut in it to weaken it before levering it off.
Hope that helps .
Maybe someone else can confirm this is what you need to do.
-
- Registered user
- Posts: 87
- Joined: 27 Jun 2014, 15:03
- 80-90 Mem No: 0
Re: How do we pop these little suckers off?
I will try that and let you know. I was hoping I wouldn’t have to come at it from the other side. To be honest tho I could do with taking it all apart to deep clean the glass anyway. No point putting shiny new caps on grimy glass
Thanks
Sent from my iPhone using Tapatalk
Thanks
Sent from my iPhone using Tapatalk
Re: How do we pop these little suckers off?
One further thought I have had, I think the spindle needs to to go back in ,in the same position as it was originally to keep the range of movement of the handle correct.
-
- Registered user
- Posts: 87
- Joined: 27 Jun 2014, 15:03
- 80-90 Mem No: 0
Re: How do we pop these little suckers off?
Yeah good point. I’ll take lots of pics as I’m dismantling it so I can reverse the process correctly
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Registered user
- Posts: 87
- Joined: 27 Jun 2014, 15:03
- 80-90 Mem No: 0
Re: How do we pop these little suckers off?
Update.
I took the window out and cleaned and took apart the catch... unfortunately once catch is apart you can’t press it back through the glass like we thought
I have had one of these caps off before as I remember there is a strange looking anti theft screw head underneath it. If only I could remember how
Sent from my iPhone using Tapatalk
I took the window out and cleaned and took apart the catch... unfortunately once catch is apart you can’t press it back through the glass like we thought
I have had one of these caps off before as I remember there is a strange looking anti theft screw head underneath it. If only I could remember how
Sent from my iPhone using Tapatalk
Re: How do we pop these little suckers off?
I am glad you posted that.I was going to strip the catch down this weekend.How you get the cap on is a real mystery.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
Re: How do we pop these little suckers off?
R0B wrote:I am glad you posted that.I was going to strip the catch down this weekend.How you get the cap on is a real mystery.
R0B wrote:I am glad you posted that.I was going to strip the catch down this weekend.How you get the cap on is a real mystery.
I saw that you were looking for a cap in the wanted section Rob . I was hopeful you would know how to get the old one off !
Here is my next suggestion for what it is worth.
With the handle removed grip the spindle in a soft jaw vice ,grind a bit of the old cap clean and weld a length of threaded studding or similar to the cap then fit nut ,washer and something to act as a slide hammer all the time protecting the glass from sparks and being careful not to break it . Or maybe someone who has done it before has a simpler meathod !
Re: How do we pop these little suckers off?
My problem is getting the new one on.Mine has been missing since i bought the van.This is mine, minus cap.The caps on mine are not like the ones on sonnys picture.I should imagine removal and fitting will be the same.Just cant get the little blighter on
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Registered user
- Posts: 1808
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: How do we pop these little suckers off?
Heat the cap first in hot water?
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
Re: How do we pop these little suckers off?
Great minds and all that.I was just thinking the same Have you done this?
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Registered user
- Posts: 1808
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: How do we pop these little suckers off?
Nope, sorry! Just thinking about how to solve the problem. Good luck!
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
Re: How do we pop these little suckers off?
Still not sorted this. There must be a way.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
- Oldiebut goodie
- Registered user
- Posts: 7293
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: How do we pop these little suckers off?
If it is metal I would go for heating it in an oven first - it worked for wagon wheels. ( Maybe a touch of freezing spray on the head first also - I would consider that as a last resort though as the glass would get cooled also and any subsequent heat may cause it to shatter)
Or is it that it is too rusty and the head size is altered?
As to getting them off - heat with a heavy duty soldering iron. They are only an interference fit so shouldn't be difficult.
Or is it that it is too rusty and the head size is altered?
As to getting them off - heat with a heavy duty soldering iron. They are only an interference fit so shouldn't be difficult.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶