Help With MOT Welding!
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 671
- Joined: 01 Feb 2010, 10:23
- 80-90 Mem No: 7803
- Location: birmingham
Re: Help With MOT Welding!
Mig welding isnt really difficult i think learning how to prepare the rotton area for repair and a bit of fabrication knowledge will go a long away .
-
- Registered user
- Posts: 1808
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Help With MOT Welding!
sarahandthebear wrote:
I was thinking of doing this as our van will need welding jobs and I shudder at the thought of paying thousands for someone else to do it. After the 10 eavining said you feel confident enough to weld onto the van not sure if I would still be terrified
Don’t get me wrong, being scared about it is what occupies my thoughts if I can’t sleep! But what’s the worst that can happen? My van, which is probably worth sod all in it’s current condition, ends up being worth sod all? And I’ll have learnt more about van so the next one I get (if I’m allowed...) works out better.
But I’m an optimist. Everything is copacetic...
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
- Ant-t
- Registered user
- Posts: 1955
- Joined: 05 Jan 2015, 14:17
- 80-90 Mem No: 14390
- Location: West Sussex
Re: Help With MOT Welding!
Agree, mig welding isn't that difficult with practice, it's good working on your van getting rid of rot and adding new metal. Also good to keep these old buses on the road,.
1983 DG Kamper 2
-
- Registered user
- Posts: 327
- Joined: 03 May 2017, 00:19
- 80-90 Mem No: 16820
- Location: Cheshire
Re: Help With MOT Welding!
Quick Update:
Had a couple of hours spare to get the dremel out today. Time to tackle the jagged edges.
A local and helpful fellow T25 owner said to apply some of this for the time being.
Not my finest job, but definitely no jagged edges!
Will try and do a similar job on the passenger side sill tomorrow. Should hopefully keep the Van on the road while i source the panels!
Had a couple of hours spare to get the dremel out today. Time to tackle the jagged edges.
A local and helpful fellow T25 owner said to apply some of this for the time being.
Not my finest job, but definitely no jagged edges!
Will try and do a similar job on the passenger side sill tomorrow. Should hopefully keep the Van on the road while i source the panels!
1984 Autosleeper, pop-top, 1.7 KY, 5-Speed
-
- Registered user
- Posts: 327
- Joined: 03 May 2017, 00:19
- 80-90 Mem No: 16820
- Location: Cheshire
Re: Help With MOT Welding!
Quick update van people...The van failed it's MOT
But surprisingly not on any of the rust/body work! Only on the brake light being on on the dash! Never been so happy with an MOT fail
Came back with a few advisories (body work included), but nothing that can't sorted when the weather is a bit nicer
The MOT guy said the brake light (which is the same light that comes on when the handbrake is on?) should go off if i top up the brake fluid.
He said he would have topped it up, but couldn't find where to add it?
This light has only just started to come on as well? So basically it almost passed it's MOT!
Can anyone tell me:
A. Where he brake fluid top up nossle is?
B. A good brake fluid type for these Vans (I will get some tomorrow!)
C. If they agree with the MOT guys diagnosis?
Cheers.
But surprisingly not on any of the rust/body work! Only on the brake light being on on the dash! Never been so happy with an MOT fail
Came back with a few advisories (body work included), but nothing that can't sorted when the weather is a bit nicer
The MOT guy said the brake light (which is the same light that comes on when the handbrake is on?) should go off if i top up the brake fluid.
He said he would have topped it up, but couldn't find where to add it?
This light has only just started to come on as well? So basically it almost passed it's MOT!
Can anyone tell me:
A. Where he brake fluid top up nossle is?
B. A good brake fluid type for these Vans (I will get some tomorrow!)
C. If they agree with the MOT guys diagnosis?
Cheers.
1984 Autosleeper, pop-top, 1.7 KY, 5-Speed
Re: Help With MOT Welding!
A.Take dash binnacle off you will find the fluid reservoir under there.
B.DOT 4 spec brake fluid.https://www.eurocarparts.com/ecp/p/car- ... &0&cc5_179" onclick="window.open(this.href);return false;
C.You cant argue with the MOT man.
B.DOT 4 spec brake fluid.https://www.eurocarparts.com/ecp/p/car- ... &0&cc5_179" onclick="window.open(this.href);return false;
C.You cant argue with the MOT man.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Help With MOT Welding!
Well that's a bit of a success then
As Rob has said, brake fluid reservoir is under the dash. It can be a bit fiddly to remove, press and unclip at the back, pull forward. Don't get too hamfi.sted or you'll break it.
I don;t know if there's a how to anywhere. This youtube video isn't that helpful https://www.youtube.com/watch?v=_K_4UF0O01M
The light is a multi function light, it warns for when brake fluid is low, hydraulic circuit failure and handbrake on.
Probably low fluid, if not check the switch on the handbrake.
Is this a new problem, or has it been like this for a while ?
Had to E D I T as the word beginning with ham failed the word censor; ham "interfered with" indeed
As Rob has said, brake fluid reservoir is under the dash. It can be a bit fiddly to remove, press and unclip at the back, pull forward. Don't get too hamfi.sted or you'll break it.
I don;t know if there's a how to anywhere. This youtube video isn't that helpful https://www.youtube.com/watch?v=_K_4UF0O01M
The light is a multi function light, it warns for when brake fluid is low, hydraulic circuit failure and handbrake on.
Probably low fluid, if not check the switch on the handbrake.
Is this a new problem, or has it been like this for a while ?
Had to E D I T as the word beginning with ham failed the word censor; ham "interfered with" indeed
Last edited by 937carrera on 01 Mar 2018, 14:47, edited 4 times in total.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
-
- Registered user
- Posts: 327
- Joined: 03 May 2017, 00:19
- 80-90 Mem No: 16820
- Location: Cheshire
Re: Help With MOT Welding!
Cheers ROB, why did they put it there?
Do you agree that the warning light comes on for the hand brake and fluid?
Do you agree that the warning light comes on for the hand brake and fluid?
1984 Autosleeper, pop-top, 1.7 KY, 5-Speed
Re: Help With MOT Welding!
So folk can come on forums and ask where it is. Have you found the screen wash filler yet?
Cheers ROB, why did they put it there?
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Help With MOT Welding!
R0B wrote:Have you found the screen wash filler yet?
Hasn't he got enough problems already
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
-
- Registered user
- Posts: 327
- Joined: 03 May 2017, 00:19
- 80-90 Mem No: 16820
- Location: Cheshire
Re: Help With MOT Welding!
937carrera wrote:Well that's a bit of a success then
As Rob has said, brake fluid reservoir is under the dash. It can be a bit fiddly to remove, press and unclip at the back, pull forward. Don't get too hamfi.sted or you'll break it.
I don;t know if there's a how to anywhere. This youtube video isn't that helpful https://www.youtube.com/watch?v=_K_4UF0O01M
The light is a multi function light, it warns for when brake fluid is low, hydraulic circuit failure and handbrake on.
Probably low fluid, if not check the switch on the handbrake.
Is this a new problem, or has it been like this for a while ?
Had to E D I T as the word beginning with ham failed the word censor; ham "interfered with" indeed
Cheers carrera, definitely a success! Considering the last "specialist" mechanic said the whole rear end needed to be removed in order for it to pass it's MOT! Feckin joker. Won't visiting him again any time soon.
I was just watching that go westy video Will get some fluid and have a fiddle tomorrow.
This is a new problem. But as i have just had my rear brakes done by "the specialist" it could be linked??
1984 Autosleeper, pop-top, 1.7 KY, 5-Speed
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Help With MOT Welding!
Rear brakes done, brakes bled, fluid not topped up, possible scenario, but a garage should have picked up on the brake warning light before handing back to you.
Make sure there isn't a leak from the bleed nipples or the bottom of the drum. You can top it up to get the MOT, but if there's a leak you'll have the problem recur in a way you might not want.
Make sure there isn't a leak from the bleed nipples or the bottom of the drum. You can top it up to get the MOT, but if there's a leak you'll have the problem recur in a way you might not want.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
-
- Registered user
- Posts: 327
- Joined: 03 May 2017, 00:19
- 80-90 Mem No: 16820
- Location: Cheshire
Re: Help With MOT Welding!
R0B wrote:So folk can come on forums and ask where it is. Have you found the screen wash filler yet?
Cheers ROB, why did they put it there?
Good point, not sure it answers my question though Think i spotted the screen wash under the hatch by the rear number plate? Did i get that right lol?
937carrera wrote:R0B wrote:Have you found the screen wash filler yet?
Hasn't he got enough problems already
Lol, seems like the swing arms are doing ok though, was worried about those.
937carrera wrote:Rear brakes done, brakes bled, fluid not topped up, possible scenario, but a garage should have picked up on the brake warning light before handing back to you.
Make sure there isn't a leak from the bleed nipples or the bottom of the drum. You can top it up to get the MOT, but if there's a leak you'll have the problem recur in a way you might not want.
Drove nearly 100+ miles before the warning light started staying on. Will check the drums, are the bleed nipples easy to spot?
1984 Autosleeper, pop-top, 1.7 KY, 5-Speed
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Help With MOT Welding!
I'll let Rob tell you about the screen wash, it was his idea after all
Given you drove 100 miles, I'd guess that the fluid wasn't topped up and brakes have bedded in dropping the level in the reservoir.
Bleed nipples are at the rear of the drum at the top next to the brake pipe. Easy to inspect, you'll need a light to assist.
Given you drove 100 miles, I'd guess that the fluid wasn't topped up and brakes have bedded in dropping the level in the reservoir.
Bleed nipples are at the rear of the drum at the top next to the brake pipe. Easy to inspect, you'll need a light to assist.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
Re: Help With MOT Welding!
You don't want to be putting screenwash in there fella.That's your coolant reserve/Header tank.It should be filled to between the level marks.Look under your front passenger side floor mat
Think i spotted the screen wash under the hatch by the rear number plate? Did i get that right lol?
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"