Cab doors locking mechanisms
Moderators: User administrators, Moderators
Re: Cab doors locking mechanisms
Before taking the door card off - I assume it can be done via the interior handle & leave the cable floppy in the door (still attached to the internal bit of the exterior door handle / mechanism).
Door card off and remove two bolts holding internal lever to door frame. This will release tension on connecting rod between lever and door lock mechanism. Release lever and tape rod to internal of door. Then re attach door lever and door card.
Cannot comment on MOT issue though.
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
-
- Trader
- Posts: 290
- Joined: 05 Oct 2012, 12:05
- 80-90 Mem No: 2717
- Location: Port Talbot
- Contact:
Re: Cab doors locking mechanisms
maxstu wrote:
Before taking the door card off - I assume it can be done via the interior handle & leave the cable floppy in the door (still attached to the internal bit of the exterior door handle / mechanism).
Door card off and remove two bolts holding internal lever to door frame. This will release tension on connecting rod between lever and door lock mechanism. Release lever and tape rod to internal of door. Then re attach door lever and door card.
Cannot comment on MOT issue though.