Tailgate seal
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 671
- Joined: 01 Feb 2010, 10:23
- 80-90 Mem No: 7803
- Location: birmingham
Tailgate seal
After starting strip down of my autohomes interior to freshen it up I noticed where tailgate seal mounts to body the top lip is rotton,is there such a repair panel I can make one myself but the curve on the ends would be a problem.
-
- Registered user
- Posts: 588
- Joined: 10 Aug 2015, 06:50
- 80-90 Mem No: 14800
- Location: Peel, Isle of Man
Re: Tailgate seal
I asked exactly the same question as part of mine is bad. Unfortunately no repair piece is available. Need to make a repair out of some old panels.
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)
Re: Tailgate seal
If you are talking about the channel the seal sits in above the rear valance then that is made up from 2 separate panels , the lower channel lip is part of the crossmember which is not available , the top lip which curves up at the ends is part of the rear boot area, this is still available . part number 251 598 287.
1992 red lle 2.2 subaru 1990 rhd caravelle 2.2 subaru 1986 california import vanagon
-
- Registered user
- Posts: 671
- Joined: 01 Feb 2010, 10:23
- 80-90 Mem No: 7803
- Location: birmingham
Re: Tailgate seal
It's the channel just below tailgate hinges.i work for a small fabrication company so ill have to do a bit of measuring and make some up.