Spraying dinatrol in a cavity.
Moderators: User administrators, Moderators
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Spraying dinatrol in a cavity.
I have had a small section of panel above trailing arm welded in by what2do , also a small bit of the inner arch which I added the service hole to with bung.
I have sprayed dinatrol in the hole but I'm sure it hasn't covered everything, it needs to spray sideways and backwards, is there an attachment of do I have to make one?
thanks
20170729_130957 by Paul_Barr, on Flickr
I have sprayed dinatrol in the hole but I'm sure it hasn't covered everything, it needs to spray sideways and backwards, is there an attachment of do I have to make one?
thanks
20170729_130957 by Paul_Barr, on Flickr
- Titus A Duxass
- Registered user
- Posts: 5778
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: Spraying dinatrol in a cavity.
If you're using aerosols of Dinitrol you can get an extension hose for them,
VW T3 GTi Camper 2,0l
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Spraying dinatrol in a cavity.
Titus A Duxass wrote:If you're using aerosols of Dinitrol you can get an extension hose for them,
Thanks, yes aerosol, but does the extension spray backwards and sideways or is it just a cut piece of pipe thats going to spray forward only?
- jrt
- Registered user
- Posts: 3416
- Joined: 01 Oct 2011, 15:53
- 80-90 Mem No: 10288
- Location: East Cheshire
Re: Spraying dinatrol in a cavity.
I used a large can last year and it sprays sideways
David
David
the future is unwritten
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Spraying dinatrol in a cavity.
jrt wrote:I used a large can last year and it sprays sideways
David
Thanks david, its a 500ml can with the tube supplied, it does go a bit sideways but less than 90 degrees, I need to spray the other side of the wheelarch secton panel with the hole in it so it needs to spray backwards.
http://www.ebay.co.uk/itm/Dinitrol-3125 ... 2749.l2649" onclick="window.open(this.href);return false;
20170730_171812 by Paul_Barr, on Flickr
Re: Spraying dinatrol in a cavity.
The waxoyl kit has an attachment tube that sprays in a fan shape.
1992 red lle 2.2 subaru 1990 rhd caravelle 2.2 subaru 1986 california import vanagon
-
- Registered user
- Posts: 2531
- Joined: 16 Aug 2012, 13:05
- 80-90 Mem No: 12017
- Location: Sidcup, Kent
Re: Spraying dinatrol in a cavity.
Hi Paul,
Bit late on this one, but the lance on the Dynax S50 sprays out at an different angles to ensure maximum coverage. Have a look at this link below (3rd picture down):
http://www.detailingworld.co.uk/forum/s ... hp?t=78012" onclick="window.open(this.href);return false;
Bit late on this one, but the lance on the Dynax S50 sprays out at an different angles to ensure maximum coverage. Have a look at this link below (3rd picture down):
http://www.detailingworld.co.uk/forum/s ... hp?t=78012" onclick="window.open(this.href);return false;
'86 DG, Weber Carb
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Spraying dinatrol in a cavity.
Thanks I made one from vacuum pipe witn holes drilled in the plastic tube as that link, prototype was not perfect so I'm going to make another.
- Dubworth
- Registered user
- Posts: 210
- Joined: 31 Dec 2015, 10:56
- 80-90 Mem No: 16562
- Location: Manchester
Re: Spraying dinatrol in a cavity.
jrt wrote:I used a large can last year and it sprays sideways
David
I use Dinitrol aerosols a lot too with the extension, I find mine sprays sideways and quite fine, almost into a mist, so is quite good for coating inside confined spaces.
1985 Sheldon High Top 1.9DF
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Spraying dinatrol in a cavity.
Thanks for the advice
finally got around to buying the attachment
it does spray sideways but not backwards or forwards
I poked it just through the hole at an angle which hopefully did the trick
20171007_082857 by Paul_Barr, on Flickr
20171007_083447 by Paul_Barr, on Flickr
finally got around to buying the attachment
it does spray sideways but not backwards or forwards
I poked it just through the hole at an angle which hopefully did the trick
20171007_082857 by Paul_Barr, on Flickr
20171007_083447 by Paul_Barr, on Flickr
- rollercoaster
- Registered user
- Posts: 897
- Joined: 10 Dec 2008, 20:30
- 80-90 Mem No: 6231
- Location: Carmarthenshire Ceridigion border
Re: Spraying dinatrol in a cavity.
Do you have a link or clue where to buy this please?
Live as if you were to die tomorrow
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Spraying dinatrol in a cavity.
https://www.ebay.co.uk/itm/Dinitrol-Ext ... 2749.l2649" onclick="window.open(this.href);return false;
If you are going to use more than one can you can get deals on two cans and a nozzle, just search ebay.
If you are going to use more than one can you can get deals on two cans and a nozzle, just search ebay.