Spraying dinatrol in a cavity.

Thin bits of metal and bright blue light. Including glass & trim.

Moderators: User administrators, Moderators

Post Reply
User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Spraying dinatrol in a cavity.

Post by itchyfeet »

I have had a small section of panel above trailing arm welded in by what2do , also a small bit of the inner arch which I added the service hole to with bung.

I have sprayed dinatrol in the hole but I'm sure it hasn't covered everything, it needs to spray sideways and backwards, is there an attachment of do I have to make one?

thanks

Image20170729_130957 by Paul_Barr, on Flickr
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

User avatar
Titus A Duxass
Registered user
Posts: 5778
Joined: 24 Nov 2007, 08:22
80-90 Mem No: 4475
Location: Cologne

Re: Spraying dinatrol in a cavity.

Post by Titus A Duxass »

If you're using aerosols of Dinitrol you can get an extension hose for them,
VW T3 GTi Camper 2,0l

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Spraying dinatrol in a cavity.

Post by itchyfeet »

Titus A Duxass wrote:If you're using aerosols of Dinitrol you can get an extension hose for them,

Thanks, yes aerosol, but does the extension spray backwards and sideways or is it just a cut piece of pipe thats going to spray forward only?
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

User avatar
jrt
Registered user
Posts: 3408
Joined: 01 Oct 2011, 15:53
80-90 Mem No: 10288
Location: East Cheshire

Re: Spraying dinatrol in a cavity.

Post by jrt »

I used a large can last year and it sprays sideways :ok
David
the future is unwritten

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Spraying dinatrol in a cavity.

Post by itchyfeet »

jrt wrote:I used a large can last year and it sprays sideways :ok
David

Thanks david, its a 500ml can with the tube supplied, it does go a bit sideways but less than 90 degrees, I need to spray the other side of the wheelarch secton panel with the hole in it so it needs to spray backwards.

http://www.ebay.co.uk/itm/Dinitrol-3125 ... 2749.l2649" onclick="window.open(this.href);return false;

Image20170730_171812 by Paul_Barr, on Flickr
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

multisi
Registered user
Posts: 1730
Joined: 03 Apr 2016, 12:01
80-90 Mem No: 12
Location: jersey

Re: Spraying dinatrol in a cavity.

Post by multisi »

The waxoyl kit has an attachment tube that sprays in a fan shape.
1992 red lle 2.2 subaru 1990 rhd caravelle 2.2 subaru 1986 california import vanagon

300CE
Registered user
Posts: 2531
Joined: 16 Aug 2012, 13:05
80-90 Mem No: 12017
Location: Sidcup, Kent

Re: Spraying dinatrol in a cavity.

Post by 300CE »

Hi Paul,

Bit late on this one, but the lance on the Dynax S50 sprays out at an different angles to ensure maximum coverage. Have a look at this link below (3rd picture down):

http://www.detailingworld.co.uk/forum/s ... hp?t=78012" onclick="window.open(this.href);return false;

:ok
'86 DG, Weber Carb

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Spraying dinatrol in a cavity.

Post by itchyfeet »

Thanks I made one from vacuum pipe witn holes drilled in the plastic tube as that link, prototype was not perfect so I'm going to make another.
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

User avatar
Dubworth
Registered user
Posts: 210
Joined: 31 Dec 2015, 10:56
80-90 Mem No: 16562
Location: Manchester

Re: Spraying dinatrol in a cavity.

Post by Dubworth »

jrt wrote:I used a large can last year and it sprays sideways :ok
David

I use Dinitrol aerosols a lot too with the extension, I find mine sprays sideways and quite fine, almost into a mist, so is quite good for coating inside confined spaces.
1985 Sheldon High Top 1.9DF

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Spraying dinatrol in a cavity.

Post by itchyfeet »

Thanks for the advice
finally got around to buying the attachment
it does spray sideways but not backwards or forwards
I poked it just through the hole at an angle which hopefully did the trick
Image20171007_082857 by Paul_Barr, on Flickr

Image20171007_083447 by Paul_Barr, on Flickr
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

User avatar
rollercoaster
Registered user
Posts: 897
Joined: 10 Dec 2008, 20:30
80-90 Mem No: 6231
Location: Carmarthenshire Ceridigion border

Re: Spraying dinatrol in a cavity.

Post by rollercoaster »

Do you have a link or clue where to buy this please?
Live as if you were to die tomorrow
Learn as if you were to live forever

Syncro Danbury 2.0 petrol AGG
 

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Spraying dinatrol in a cavity.

Post by itchyfeet »

https://www.ebay.co.uk/itm/Dinitrol-Ext ... 2749.l2649" onclick="window.open(this.href);return false;

If you are going to use more than one can you can get deals on two cans and a nozzle, just search ebay.
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

Post Reply