Child seats
Moderators: User administrators, Moderators
Child seats
Hello, we are new to the forum and new to the world of T25's, if all goes well, we take delivery of our first ever camper today!! Fingers crossed...
I'm looking for some advice on child seats. My daughter is 3 and into the category 3 full size booster seats, in our boring car we have a maxicosi that fits on a isofix base. This isn't going to be compatible with the rock and roll, but I was wondering if anyone had advice on seatbelt fitted seats for this size, but fitting to the 3 point seatbelt found in the '83 ish yeah vans?
Thank you!
I'm looking for some advice on child seats. My daughter is 3 and into the category 3 full size booster seats, in our boring car we have a maxicosi that fits on a isofix base. This isn't going to be compatible with the rock and roll, but I was wondering if anyone had advice on seatbelt fitted seats for this size, but fitting to the 3 point seatbelt found in the '83 ish yeah vans?
Thank you!
1983 1.9l poptop Westfalia
-
- Trader
- Posts: 16347
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Child seats
You can buy the isofix brackets to bolt in using the rear seatbelt anchor points already in the van. I think its a F.o.r.d. focus part.
"Bene" in syncro section fitted some to his hitop van iirc
Ich fahre einen Bulli. Ich hilfe mir selbst...meistens!
"Bene" in syncro section fitted some to his hitop van iirc
Ich fahre einen Bulli. Ich hilfe mir selbst...meistens!
- Bigjcc55
- Registered user
- Posts: 637
- Joined: 21 Aug 2011, 08:55
- 80-90 Mem No: 10140
- Location: Ayrshire, scotland
Re: Child seats
As Ian says above, I have two of the focus ones in my Devon, copied from "Bene"
They don't interfere with the workings of the bed at all.
They don't interfere with the workings of the bed at all.
1985 1.9 Devon moonraker
1992 2.1 SA big window syncro
1991 TDI syncro panel van
1992 2.1 SA big window syncro
1991 TDI syncro panel van
-
- Registered user
- Posts: 878
- Joined: 25 May 2008, 09:41
- 80-90 Mem No: 10335
- Location: folkestone, kent
Re: Child seats
Are they a straight fit into existing mounts ? I have a factory Westy
- Bigjcc55
- Registered user
- Posts: 637
- Joined: 21 Aug 2011, 08:55
- 80-90 Mem No: 10140
- Location: Ayrshire, scotland
Re: Child seats
No I clipped the Isofix bracket to the seat and slipped it between the base and backrest.
Remove the seat from Isofix and ensure you can still use the bed.
Then drill and bolt up. Just watch you don't drill anything you're not supposed to in the void above the gear box, on a 2wd there's not much apart from insulation.
https://www.ebay.co.uk/itm/231885618162" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/seat-belt- ... plate.html" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/set-screw- ... f-x-1.html" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/washer-sea ... -bolt.html" onclick="window.open(this.href);return false;
Remove the seat from Isofix and ensure you can still use the bed.
Then drill and bolt up. Just watch you don't drill anything you're not supposed to in the void above the gear box, on a 2wd there's not much apart from insulation.
https://www.ebay.co.uk/itm/231885618162" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/seat-belt- ... plate.html" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/set-screw- ... f-x-1.html" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/washer-sea ... -bolt.html" onclick="window.open(this.href);return false;
1985 1.9 Devon moonraker
1992 2.1 SA big window syncro
1991 TDI syncro panel van
1992 2.1 SA big window syncro
1991 TDI syncro panel van
Re: Child seats
Thanks for this advice. Do you think you could post a picture of the fixing? I'd like to give it a go, just be a bit more confident knowing what the end product looks like.Bigjcc55 wrote:No I clipped the Isofix bracket to the seat and slipped it between the base and backrest.
Remove the seat from Isofix and ensure you can still use the bed.
Then drill and bolt up. Just watch you don't drill anything you're not supposed to in the void above the gear box, on a 2wd there's not much apart from insulation.
https://www.ebay.co.uk/itm/231885618162" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/seat-belt- ... plate.html" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/set-screw- ... f-x-1.html" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/washer-sea ... -bolt.html" onclick="window.open(this.href);return false;
1983 1.9l poptop Westfalia
- Bigjcc55
- Registered user
- Posts: 637
- Joined: 21 Aug 2011, 08:55
- 80-90 Mem No: 10140
- Location: Ayrshire, scotland
Re: Child seats
Then pull off the insulation to install the plate, took about 20 minutes.
1985 1.9 Devon moonraker
1992 2.1 SA big window syncro
1991 TDI syncro panel van
1992 2.1 SA big window syncro
1991 TDI syncro panel van
- Born Too Late
- Registered user
- Posts: 155
- Joined: 07 Feb 2015, 19:42
- 80-90 Mem No: 14236
- Location: Southend-on-Sea
Re: Child seats
That's what I love about forums, haven't bought a T25 yet but when I do I'll be fitting 2 of these to it for my 2 kids.
I had to buy a Ford Isofox bracket to fit to my Focus a couple of years ago, I found out something interesting from a Ford forum at the time. Ford supply the brackets for free with all new Focuses, loose in the boot. The dealer only fits them if the buyer specifies it as an extra. All the rest they remove, keep and sell separately; the scoundrels!
Wes
I had to buy a Ford Isofox bracket to fit to my Focus a couple of years ago, I found out something interesting from a Ford forum at the time. Ford supply the brackets for free with all new Focuses, loose in the boot. The dealer only fits them if the buyer specifies it as an extra. All the rest they remove, keep and sell separately; the scoundrels!
Wes
Ziggy Starbus-1988 Autosleeper high top 2.1 injection
Lola-1977 Triumph Spitfire
Lola-1977 Triumph Spitfire
Re: Child seats
Thanks so much!
I'll be giving this a go in the next couple of weeks.
I'll be giving this a go in the next couple of weeks.
1983 1.9l poptop Westfalia
Re: Child seats
Seems like a great idea and one I may use. Where does the tether strap/leg go? Did you buy a specific seat that fit your van? I belive there are many different seats for certain cars. Cheers, Jon.Bigjcc55 wrote:Not the best of pictures but it shows where it bolts to, I clicked it onto the seat then squeezed the fixing between the base and backrest till it hit two nice flat sections of the floor to drill.
Then pull off the insulation to install the plate, took about 20 minutes.
Sent from my SM-G920F using Tapatalk
1982 Diesel hightop. 1Y engine. Still work in progress but running and taking us on holidays.
- Bigjcc55
- Registered user
- Posts: 637
- Joined: 21 Aug 2011, 08:55
- 80-90 Mem No: 10140
- Location: Ayrshire, scotland
Child seats
The leg just drops down to the floor as it does in the car, the seat I have didn't have a teather strap fitted.
With the Iso any seat fits with a compatible fixing.
I've had to take the back cushion off the bed to travel but it all un-clicks when you get to where you're heading, and sit the cushion back on.
With the Iso any seat fits with a compatible fixing.
I've had to take the back cushion off the bed to travel but it all un-clicks when you get to where you're heading, and sit the cushion back on.
Last edited by Bigjcc55 on 23 Jul 2017, 10:49, edited 1 time in total.
1985 1.9 Devon moonraker
1992 2.1 SA big window syncro
1991 TDI syncro panel van
1992 2.1 SA big window syncro
1991 TDI syncro panel van
Re: Child seats
Hi I also need to fit isofix to my t25 but my isofix Base is different that the one in pictures? The folding seat bed dosent look very strong to fit isofix to it so I was thinking of reinforcing the seat bed and the mounting point on the chassis then welding isofix the seat has anyone tried or done this as this is the only way I think it can be done for me??
Re: Child seats
From what I understand, the isofix bracket bought off ebay was bolted/welded to the bulk head. The base then just clips to the bracket and simply sits on the seat/bed cushion? That way, the strength of the bed doesn't come into it. Maybe!Gnrsoul wrote:Hi I also need to fit isofix to my t25 but my isofix Base is different that the one in pictures? The folding seat bed dosent look very strong to fit isofix to it so I was thinking of reinforcing the seat bed and the mounting point on the chassis then welding isofix the seat has anyone tried or done this as this is the only way I think it can be done for me??
Sent from my SM-G920F using Tapatalk
1982 Diesel hightop. 1Y engine. Still work in progress but running and taking us on holidays.
Re: Child seats
Jonnyb416 wrote:From what I understand, the isofix bracket bought off ebay was bolted/welded to the bulk head. The base then just clips to the bracket and simply sits on the seat/bed cushion? That way, the strength of the bed doesn't come into it. Maybe!Gnrsoul wrote:Hi I also need to fit isofix to my t25 but my isofix Base is different that the one in pictures? The folding seat bed dosent look very strong to fit isofix to it so I was thinking of reinforcing the seat bed and the mounting point on the chassis then welding isofix the seat has anyone tried or done this as this is the only way I think it can be done for me??
Sent from my SM-G920F using Tapatalk
I will try and put some pictures up to show that this will not work for me my isofix seat Base is stright fitments and the one shown in the other pictures that have been bolted to chassis are angled the seat gap is no ware near
Re: Child seats
I think I know what you mean but definitely worth putting some pictures up. Could be a case that some isofix bases will not fit.
Sent from my SM-G920F using Tapatalk
Sent from my SM-G920F using Tapatalk
1982 Diesel hightop. 1Y engine. Still work in progress but running and taking us on holidays.