Hi, I've had a search for this and can't find any other references, so here goes...
Currently running a late 1.9DG WBX and having a 2.1MV rebuilt with DJ pistons to run with my Pierburg 2E3 on a 120 jet.
I have the DG distributor but looking to upgrade to a DJ one.
I understand that 'N' suffix DJ distributors are hard to find but wondered if anyone has used one of these...
https://en.hoffmann-speedster.com/bus/b ... 2.1-wbx-dj" onclick="window.open(this.href);return false;
Are they any good and is it worth spending £250 on over the serviceable DG one?
Thanks,
Jim
Distributor for 2.1DJ with 2e3
Moderators: User administrators, Moderators
- SpongerJim
- Registered user
- Posts: 14
- Joined: 25 Aug 2013, 21:54
- 80-90 Mem No: 12777
- Location: Hungerford
Distributor for 2.1DJ with 2e3
T25 High top 1.9 Petrol 1986 DG
Re: Distributor for 2.1DJ with 2e3
As you are going carb I would try running with DG dizzy first. Likely timing marks on crank pulley will be out when setting timing with a strobe though. Setting by ear and tick over will be close enough to start with.
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
"Blissfully happy in your presence".
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Distributor for 2.1DJ with 2e3
I have an N suffix distributor spare.
It's for sale.
It's for sale.
AGG 2.0L 8V. (Golf GTi MkIII)
- SpongerJim
- Registered user
- Posts: 14
- Joined: 25 Aug 2013, 21:54
- 80-90 Mem No: 12777
- Location: Hungerford
Re: Distributor for 2.1DJ with 2e3
Yes I’d be interested in that! I’ve PM’d you my number.kevtherev wrote:I have an N suffix distributor spare.
It's for sale.
T25 High top 1.9 Petrol 1986 DG
- 123-jn
- Registered user
- Posts: 588
- Joined: 28 Mar 2013, 19:50
- 80-90 Mem No: 12161
- Location: Bromsgrove Worcstershire
Re: Distributor for 2.1DJ with 2e3
I am running a DJ engine with a 2E3 and the DG dizzy. It runs great no problems . The advance curves are so similar overall taking vacuum and centrifugal into account that it really is no problem. I have no Pinking on Petrol or LPG and pretty sprightly acceleration for an Auto. As for the rejetting , I havent bothered on mine seems to run OK in the right parts of the mixture gauge. I run on LPG most of the time. The petrol still gives slightly more power but now with the Blos on Gas it is not really noticeable.
My timing is set at 12btdc vac disconnected and I run on super unleaded when not on lpg.
My timing is set at 12btdc vac disconnected and I run on super unleaded when not on lpg.
123-jn Autohomes Komet 2.1 DJ AUTO 1989 (closed loop LPG pierburg 2E3)
- Citroen C4 Picasso 1.6 HDi
- Citroen C4 Picasso 1.6 HDi
- SpongerJim
- Registered user
- Posts: 14
- Joined: 25 Aug 2013, 21:54
- 80-90 Mem No: 12777
- Location: Hungerford
Re: Distributor for 2.1DJ with 2e3
As much as I want the best performance that I can get, I’m paranoid about melting a piston due to preignition so want to do everything I can to ensure I get optimal ignition.
I’m not planning to run LPG but will probably run super unleaded.
I’m not planning to run LPG but will probably run super unleaded.
T25 High top 1.9 Petrol 1986 DG
- 123-jn
- Registered user
- Posts: 588
- Joined: 28 Mar 2013, 19:50
- 80-90 Mem No: 12161
- Location: Bromsgrove Worcstershire
Re: Distributor for 2.1DJ with 2e3
I have now covered about 40000 miles with this set up and have absolutely no melted pistons or burnt valves. Just an oil leak round the dipstick tube!!!!
123-jn Autohomes Komet 2.1 DJ AUTO 1989 (closed loop LPG pierburg 2E3)
- Citroen C4 Picasso 1.6 HDi
- Citroen C4 Picasso 1.6 HDi