I need to replace the engine mounts on my 1983 2.0 Air cooled CU engine.
From this diagram, I know I need to undo the nuts/bolts marked 2 + 4 to release the mounting bar from the van, but to release it from the engine, do I
- Undo nuts marked 14, leaving the engine bracket on the engine, or
- Undo bolts marked 6 and 7, and remove the bracket from the engine with the mounting bar.
https://drive.google.com/file/d/1tcXO6e ... sq9kheSdyB
Engine mount removal
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 263
- Joined: 17 Jan 2016, 19:38
- 80-90 Mem No: 0
Engine mount removal
1983 2.0L Air Cooled Devon Moonraker
-
- Trader
- Posts: 2591
- Joined: 27 May 2009, 18:56
- 80-90 Mem No: 16628
- Location: hayling island
Re: Engine mount removal
that looks like a water cooled bar, there are a few differences, ill see if I can find a picture
- bigherb
- Registered user
- Posts: 2579
- Joined: 27 Mar 2008, 13:50
- 80-90 Mem No: 5789
- Location: West Kent
Re: Engine mount removal
You need to remove/pull back the fan housing to reach the mounting bolt in the carrier.
- Attachments
-
- Dscf3532 640 Engine Mounts.jpg (79.37 KiB) Viewed 941 times
1982 Camper 1970 1500 Beetle Various Skoda's, Ariel Arrow
-
- Registered user
- Posts: 263
- Joined: 17 Jan 2016, 19:38
- 80-90 Mem No: 0
Re: Engine mount removal
Perfect. Thanks bigherb ! Hopefully get started on it this afternoon.
1983 2.0L Air Cooled Devon Moonraker