Sorry if I'm not posting this in the right place, but I want to buy a gas analyser so I can do the C02 check/adjustment on my 2.1l petrol. Has anyone got one that they'd recommend? Not sure which brand/model is best to go for.
Scott
Exhaust gas analyser
Moderators: User administrators, Moderators
- scotttie
- Registered user
- Posts: 121
- Joined: 11 May 2011, 09:56
- 80-90 Mem No: 16828
- Location: East Sussex
Exhaust gas analyser
______________________________________________________________________
2.1DJ Syncro Reimo hightop
2.1DJ Syncro Reimo hightop
Re: Exhaust gas analyser
I've just ordered one of these: Gunson G4125 Gastester Digital.
Over £200 from Gunston but half that from Amazon albeit wtg 2 - 5 weeks. Forum comments indicate that Gunston will not advise or service unless direct from them but i'll take a chance on that(Shrug emoji).
Over £200 from Gunston but half that from Amazon albeit wtg 2 - 5 weeks. Forum comments indicate that Gunston will not advise or service unless direct from them but i'll take a chance on that(Shrug emoji).
Well-timed silence hath more eloquence than speech.
"A quiet shy boy who took little part in games or sport"
88 High top 2.1 WBX
"A quiet shy boy who took little part in games or sport"
88 High top 2.1 WBX
- Oldiebut goodie
- Registered user
- Posts: 7295
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Exhaust gas analyser
^^^^^^^^ CO tester not a CO2 tester!
I spent ages searching for a CO2 tester for heaters but couldn't find one with enough range.
I spent ages searching for a CO2 tester for heaters but couldn't find one with enough range.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Exhaust gas analyser
I have an old Gunson 4121 Professional I bought off ebay - works well enough.
OBG - I'm curious and I think you may know, care to explain how the hotwire system calibrates in air and then stays reasonably accurate for measuring CO in the exhaust over a wide range.
I'm thinking that the electrical conductivity of the 21% oxygen in air somehow becomes a surrogate for the electrical conductivity of CO in the exhaust gases, calibrated around a 2% normalised value ????
OBG - I'm curious and I think you may know, care to explain how the hotwire system calibrates in air and then stays reasonably accurate for measuring CO in the exhaust over a wide range.
I'm thinking that the electrical conductivity of the 21% oxygen in air somehow becomes a surrogate for the electrical conductivity of CO in the exhaust gases, calibrated around a 2% normalised value ????
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
- Oldiebut goodie
- Registered user
- Posts: 7295
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Exhaust gas analyser
Sorry - not something that I have knowledge of.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Exhaust gas analyser
Shame, I was hoping / thought you might, thanks for responding anyway
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
Re: Exhaust gas analyser
Just got news the possible five weeks lead time has turned into 14-15 June.
Re the question of calibration: About ten years of my very wide based engineering career was spent in the manufacture of all kinds of measuring and control instrumentation. A common thread throughout was the non - linearity of response of the measuring device together with the need to compensate for the environment in which the measurement is made. In the old days these issues often needed to be dealt with by a matching non - linear meteor scale and the - in our case - temperature compensation by reference tables. The advent of digital electronics enable both these issues to be fixed with simple algorithms or programmable chips.
Re the question of calibration: About ten years of my very wide based engineering career was spent in the manufacture of all kinds of measuring and control instrumentation. A common thread throughout was the non - linearity of response of the measuring device together with the need to compensate for the environment in which the measurement is made. In the old days these issues often needed to be dealt with by a matching non - linear meteor scale and the - in our case - temperature compensation by reference tables. The advent of digital electronics enable both these issues to be fixed with simple algorithms or programmable chips.
Well-timed silence hath more eloquence than speech.
"A quiet shy boy who took little part in games or sport"
88 High top 2.1 WBX
"A quiet shy boy who took little part in games or sport"
88 High top 2.1 WBX
-
- Registered user
- Posts: 165
- Joined: 30 Aug 2016, 20:26
- 80-90 Mem No: 0
Re: Exhaust gas analyser
If you go on the Testo website they do hand held CO2/CO infra red analysers which are pretty good for a cheap gas analyser.
1988 Hightop Camper originally 2.1dj now Subaru ej2.5 powered
1988 Hightop Camper originally 2.1dj now Subaru ej2.5 powered
1987 Hightop with Subaru EJ25 Conversion