Gearbox link help
Moderators: User administrators, Moderators
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Gearbox link help
Gearbox linkage.
How is it disconnected from the gearbox?
How is it disconnected from the gearbox?
AGG 2.0L 8V. (Golf GTi MkIII)
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Gearbox link help
13mm nut on the relay lever but this can stay on if you like
two bolts through the plate holding the bush
http://wiki.club8090.co.uk/index.php/Ge ... hanism_Pt2" onclick="window.open(this.href);return false;
two bolts through the plate holding the bush
http://wiki.club8090.co.uk/index.php/Ge ... hanism_Pt2" onclick="window.open(this.href);return false;
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Gearbox link help
Perfect thanks.
Engine out day today
Fettled 2.1 going in
Engine out day today
Fettled 2.1 going in
AGG 2.0L 8V. (Golf GTi MkIII)
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Gearbox link help
don't need to disconnet linkage to remove engine?
- Mocki
- Membership Admin
- Posts: 16979
- Joined: 29 Sep 2005, 09:27
- 80-90 Mem No: 428
- Location: Mansfield Notts
- Contact:
Re: Gearbox link help
itchyfeet wrote:don't need to disconnet linkage to remove engine?
you should, or the link bars get bent when lowering the gearbox to allow the engine to come off
Steve
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Gearbox link help
Mocki wrote:itchyfeet wrote:don't need to disconnet linkage to remove engine?
you should, or the link bars get bent when lowering the gearbox to allow the engine to come off
never had a problem myself and had engines in and out several times
Can't see how anything would bend
- Ian Hulley
- Registered user
- Posts: 12659
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: Gearbox link help
kevtherev wrote: Fettled 2.1 going in
Wooo, what ya done ?
itchyfeet wrote:Mocki wrote:itchyfeet wrote:don't need to disconnet linkage to remove engine?
you should, or the link bars get bent when lowering the gearbox to allow the engine to come off
never had a problem myself and had engines in and out several times
Can't see how anything would bend
Obviously we've bin doing it wrong all these years Steve
Live and learn eh.
Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Gearbox link help
Recon heads, and new jacket seals.
Engine was a goodun from Switzerland.
Very Good OP, and excellent compression.
No oil leaks.
Ian I could do with a few (8) M8X45 or 50 stainless bolts/washers if you have some knocking about?
And a few M8X30 perhaps?
Engine was a goodun from Switzerland.
Very Good OP, and excellent compression.
No oil leaks.
Ian I could do with a few (8) M8X45 or 50 stainless bolts/washers if you have some knocking about?
And a few M8X30 perhaps?
AGG 2.0L 8V. (Golf GTi MkIII)
- Ian Hulley
- Registered user
- Posts: 12659
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: Gearbox link help
kevtherev wrote: Ian I could do with a few (8) M8X45 or 50 stainless bolts/washers if you have some knocking about?
And a few M8X30 perhaps?
I looked myself the other day but the cupboard was bare (that's the trouble with having bloody holidays ! ) are you in a rush ?
Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
- Ian Hulley
- Registered user
- Posts: 12659
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: Gearbox link help
kevtherev wrote:Recon heads, and new jacket seals.
Engine was a goodun from Switzerland.
Very Good OP, and excellent compression.
No oil leaks.
Is that the one Si Toomanytoys has done for you ?
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Gearbox link help
Yes a bit rushed I suppose.
Yes it is Simons.
I think I did this at the right time.
Lots of warning signs, bit concerned about the shaft play, will that shag the seals?
Yes it is Simons.
I think I did this at the right time.
Lots of warning signs, bit concerned about the shaft play, will that shag the seals?
AGG 2.0L 8V. (Golf GTi MkIII)
- Ian Hulley
- Registered user
- Posts: 12659
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: Gearbox link help
kevtherev wrote: bit concerned about the shaft play, will that shag the seals?
That's what the spigot bearing's there for ... to support the input shaft.
Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Gearbox link help
Ah sorry I meant the gbox end, Simons answered it ok.Ian Hulley wrote:kevtherev wrote: bit concerned about the shaft play, will that shag the seals?
That's what the spigot bearing's there for ... to support the input shaft.
Ian
AGG 2.0L 8V. (Golf GTi MkIII)