Fuel pipe D73379 ID 6MM.

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

User avatar
maxstu
Registered user
Posts: 4474
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Fuel pipe D73379 ID 6MM.

Post by maxstu »

Is this stuff suitable for use in engine bay please? From supply at bulkhead to fuel pump.....
It doesnt look very robust compared to R6 braided. And l dont want to make a flaming fool of myself :lol: again!
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
"Blissfully happy in your presence".

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Fuel pipe D73379 ID 6MM.

Post by itchyfeet »

This is what I fitted to my DG
https://www.brickwerks.co.uk/fuel-hose- ... 5-5mm.html" onclick="window.open(this.href);return false;

can't remember what yours is but I think DG if I remember

don't pi$$ about with anything less

Read the description
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

300CE
Registered user
Posts: 2531
Joined: 16 Aug 2012, 13:05
80-90 Mem No: 12017
Location: Sidcup, Kent

Re: Fuel pipe D73379 ID 6MM.

Post by 300CE »

As Paul says Stu, go for the Cohline offered by Brickwerks, don’t be tempted to buy from eBay (I can confirm by experience)!
'86 DG, Weber Carb

User avatar
maxstu
Registered user
Posts: 4474
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Re: Fuel pipe D73379 ID 6MM.

Post by maxstu »

Thanks both. 2.1 on Pierburg.
Its a temp fitting. I was messing around with fuel cut off solenoid for LPG. Cut a healthy piece of pipe between bulkhead and fuel pump to fit. Got messed up and lost direction. Van wouldnt idle. Perhaps l should have fitted after fuel pump?
So bench test solenoid. Fine. But messing up carb idle. Removed cut off switch. So either join healthy pipe with plastic in line fitment (over manifold) or use one piece of D73379 with proper clips. Latter me think.
Thank you my friends...Justin, best of luck for tomorrow...itll be fine. Which garage?
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
"Blissfully happy in your presence".

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Fuel pipe D73379 ID 6MM.

Post by itchyfeet »

fuel pipe is relatively cheap
its a service iyem in my opinion
don't join it just fit new
fit quality

2.1 on pierburg with mechanical pump is same as DG 5.5mm.

2.1 in injection is 7.3mm and a short bit of large size tank to pump.
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

User avatar
937carrera
Registered user
Posts: 3599
Joined: 05 Apr 2015, 19:29
80-90 Mem No: 16333
Location: N Yorks.

Re: Fuel pipe D73379 ID 6MM.

Post by 937carrera »

itchyfeet wrote: its a service item in my opinion

Fixed that for you

It's not a service item if you fit the Brickwerks stuff, at least according to Mr Baxter. (Inspect by all means once replaced)

I'm on the same page as him, ignore all the internet specification crap and fit quality product. Did that 4 years ago on the 412, long before I knew of BW.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Fuel pipe D73379 ID 6MM.

Post by itchyfeet »

Clutch, brake shoes, discs they all last along time but they are still service items
VW may not have specified fuel pipe as a service item but they did not forsee a 30 year+ life or ethynol in petrol.
Even gearbox oil was not a service item for VW but I'm sure we agree it is now.


937carrera wrote:
itchyfeet wrote: its a service item in my opinion

Fixed that for you

It's not a service item if you fit the Brickwerks stuff, at least according to Mr Baxter. (Inspect by all means once replaced)

I'm on the same page as him, ignore all the internet specification crap and fit quality product. Did that 4 years ago on the 412, long before I knew of BW.
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

User avatar
937carrera
Registered user
Posts: 3599
Joined: 05 Apr 2015, 19:29
80-90 Mem No: 16333
Location: N Yorks.

Re: Fuel pipe D73379 ID 6MM.

Post by 937carrera »

Pretty much agreed, I think the only difference is I don't accept that fuel hose needs to be replaced every year, or two years or three years. Get the right stuff and it doesn't need to be replaced due to internal deterioration, only external damage, hence my inspect comment. (buy rubbish and it is a consumable.... consumed by the ethanol content)

BW hose is said to be good for E100 or B100
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Fuel pipe D73379 ID 6MM.

Post by itchyfeet »

how do you inspect the inside of a hose?

2.1s are covered in pvc sleeve so hard to inspect on outside without alot of work
If I was to take my 2.1 hoses off to remove sleeve to inspect think I'd just fit new.

Service interval?
as said depends on quality.
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

User avatar
937carrera
Registered user
Posts: 3599
Joined: 05 Apr 2015, 19:29
80-90 Mem No: 16333
Location: N Yorks.

Re: Fuel pipe D73379 ID 6MM.

Post by 937carrera »

You don't need to check the inside of correct hose, only the outside for physical damage, no disassembly required.

Manufacturers had to change materials used through the entire fuel system when biofuels were introduced, to a much greater extent on petrol than diesel cars. Of course Brazil has been running on (and making) ethanol cars for about 40 years, so this isn't new.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine

User avatar
Oldiebut goodie
Registered user
Posts: 7261
Joined: 18 Apr 2008, 01:19
80-90 Mem No: 11135
Location: Eastern Angle

Re: Fuel pipe D73379 ID 6MM.

Post by Oldiebut goodie »

I did post the specs on the variously rated hoses once and found that some of the specs gave the max permeability of the inner using ethanol but the outer layer was not rated for ethanol at all! So any ethanol that got through that inner layer would cause the outer to deteriorate rapidly - that was my thinking at the time. It seemed to be borne out by people cutting open their externally cracked hoses and finding the inner had no cracks.
Simon put a lot of effort into sourcing the correct spec hose to cope with the ethanol and I would stick with using that having had supposedly good hose cracking on the boat engine in a few months and that is diesel!
I am using Lloyds marine grade now for my heaters as the specs for that are higher than R7.( I would use R11 if I could find a supply at the correct bore and not needing a mortgage :D )
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶

300CE
Registered user
Posts: 2531
Joined: 16 Aug 2012, 13:05
80-90 Mem No: 12017
Location: Sidcup, Kent

Re: Fuel pipe D73379 ID 6MM.

Post by 300CE »

maxstu wrote:Justin, best of luck for tomorrow...itll be fine. Which garage?

Take it to a place called Ural’s at Brands Hatch. Good news she went straight through :ok
'86 DG, Weber Carb

User avatar
maxstu
Registered user
Posts: 4474
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Re: Fuel pipe D73379 ID 6MM.

Post by maxstu »

300CE wrote:
maxstu wrote:Justin, best of luck for tomorrow...itll be fine. Which garage?

Take it to a place called Ural’s at Brands Hatch. Good news she went straight through :ok

Well congratulations. :ok

Neil's place? Old Etonian guy smoking a pipe?. Top bloke he is, with great sense of humour. Thats where my bike was MOT'd for the last five years . Some gits pinched it three weeks ago. The buggers :twisted:
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
"Blissfully happy in your presence".

300CE
Registered user
Posts: 2531
Joined: 16 Aug 2012, 13:05
80-90 Mem No: 12017
Location: Sidcup, Kent

Re: Fuel pipe D73379 ID 6MM.

Post by 300CE »

That’s the place mate!! Plenty of tea and biscuits whilst you wait as well. Been going there for quite sometime with the bus and the bikes.

No news on your bike then mate? Let’s hope the theiving little sh1ts have come to some harm.
'86 DG, Weber Carb

User avatar
maxstu
Registered user
Posts: 4474
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Re: Fuel pipe D73379 ID 6MM.

Post by maxstu »

No news. They will be judged one day. Total scum. Third stolen bike in last 20 years'. Cant give up though. In my blood. My dad the GOAT is still riding at 86. Likely kill him before skin cancer does :roll:
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
"Blissfully happy in your presence".

Post Reply