1st gear dog leg selection

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
mshaw1980
Registered user
Posts: 588
Joined: 10 Aug 2015, 06:50
80-90 Mem No: 14800
Location: Peel, Isle of Man

1st gear dog leg selection

Post by mshaw1980 »

What is the technique for the above as I have been struggling to get it in to 1st? Sometimes it goes in but most of the time it's only part in and so the van crawls forward, not good at lights or junctions. Had a VW t2 / t3 specialist over here check my gear adjustment and he said it's great, much better than his doka. I can find all gears fine but 1st is a struggle. He told me push down then pull back but not to 'fight' it in as I was almost lifting the stick then pulling back. Tried his suggestion and it is better but still struggling. Is it worth adjusting the shift rod mounting on the gearbox as the spline joint appears fine?
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)

User avatar
937carrera
Registered user
Posts: 3599
Joined: 05 Apr 2015, 19:29
80-90 Mem No: 16333
Location: N Yorks.

Re: 1st gear dog leg selection

Post by 937carrera »

Posted this a few days ago

937carrera wrote:My dogleg needs a certain technique.

For first, into neutral, push to the far left, then pull back for first
For reverse, into neutral, bush to the far left, push down on the gear lever and then push forward.

Hope that helps


http://forum.club8090.co.uk/viewtopic.php?f=37&t=165687
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine

Post Reply