How remove pulley bolt on an Auto/oil pump removal

[Sir Brixalot]

I'll do it now.
All clear inside and no oil around base? Got to be the oil pump

[Sir Brixalot]

Going to do the oil pump. There's a big pipe that runs across the front of it. It's not mentioned in the Haynes. Can I just unbolt it?

[Cobra88]

Its a water pipe mate

You need to drain the coolant im afraid

[Sir Brixalot]

Not again aaarggh

[Cobra88]

I gave in and cut my 25l water container in half vertically

Works a treat for catching every drop af £30 of new antifreeze

[Sir Brixalot]

Oil pump arrived. Went to take water pipe off but still half of oil pump cover would be inaccessible. Does the engine have to come out to replace oil pump?

[Cobra88]

I removed all the tin ware & crank pulley
removed main exhaust heat shield bolts
lowered engine bar and removed it leaving the engine on the jack.
Unbolted coolant bottle bracket from exh heatshield
then rolled exhaust heatshield round out of the way.
you also might need a puller to get the oil pump out.

Sounds a lot but pretty straightforward.

Rick

[Sir Brixalot]

Can you remember how long it took Rick?

[Cobra88]

Took me a morning for the whole job

Probably 5 hours but im a mechanical engineer by trade these days and a welder
(Farming equipment)