As above. They all seem pretty cheap so got one on eBay but the locating tang is not angled like the original and doesn't clip into the backplate. Is this normal for these aftermarket parts or does it sound wrong?
Cheers
New rear handbrake cable doesn't locate in rear backplate
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 588
- Joined: 10 Aug 2015, 06:50
- 80-90 Mem No: 14800
- Location: Peel, Isle of Man
New rear handbrake cable doesn't locate in rear backplate
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)
- Oldiebut goodie
- Registered user
- Posts: 7294
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: New rear handbrake cable doesn't locate in rear backplate
In the distant past:
http://forum.club8090.co.uk/viewtopic.p ... 6&start=30
or are you referring to something else?
http://forum.club8090.co.uk/viewtopic.p ... 6&start=30
or are you referring to something else?
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
- Registered user
- Posts: 313
- Joined: 24 Mar 2015, 11:44
- 80-90 Mem No: 14339
- Location: Aberfoyle
Re: New rear handbrake cable doesn't locate in rear backplate
Ah. I searched for that thread.
Was really useful when I first got my van.
Sent from my SM-A320FL using Tapatalk
Was really useful when I first got my van.
Sent from my SM-A320FL using Tapatalk
2.0 CU
-
- Registered user
- Posts: 588
- Joined: 10 Aug 2015, 06:50
- 80-90 Mem No: 14800
- Location: Peel, Isle of Man
Re: New rear handbrake cable doesn't locate in rear backplate
Thanks for that. My new cable doesn't locate in the backplate as the metal tang just flaps about. Have ended up putting the old cable back on although removing it mullered the locating tang so have put a couple of spot welds on to hold it in place. Not ideal but hey ho
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)
- Oldiebut goodie
- Registered user
- Posts: 7294
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: New rear handbrake cable doesn't locate in rear backplate
I can't think what you mean by 'tang' - tang is usually applied to something like tang of a file or sword/knife - the part that should go into the handle. (I have always assumed that tang is a corruption of tongue or vice versa ) The only bit that I know that locates in the backplate is the shoulder at the end of the cable outer - this just needs reducing in diameter by 0.5mm.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
- Registered user
- Posts: 313
- Joined: 24 Mar 2015, 11:44
- 80-90 Mem No: 14339
- Location: Aberfoyle
Re: New rear handbrake cable doesn't locate in rear backplate
Ì suspect that the cable sheath won't fit as per thread
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk
2.0 CU
-
- Registered user
- Posts: 588
- Joined: 10 Aug 2015, 06:50
- 80-90 Mem No: 14800
- Location: Peel, Isle of Man
Re: New rear handbrake cable doesn't locate in rear backplate
Couldn't think of the word to describe the tang but it is the cable sheath / shoulder which locates in the backplate. It was loose in my backplate and flapped around. That sounds a bit weird doesn't it
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)