Head studs
Moderators: User administrators, Moderators
Head studs
I've taken the heads of my t25 1.9dg engine and found the head studs were 10mm mild steel studding cut to size,the original studs are so expensive I thought I could use 10mm x 1.5 studding of grade 10.9 if available, does anyone know of a source?
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Head studs
I have never seen anybody fix an engine properly with studding, it's a bodge.
Dig deep and get the right part is my advice.
Dig deep and get the right part is my advice.
Re: Head studs
I've obtained new studs but there's a problem? The new studs are 12mm x1.5 thread one end and 10mm x1.5 the other. The 10mm fits the engine case but the cylinder heads holes are 10.5mm dia. The dome nuts are 10mm x1.5 thread. Are the studs wrong or are the heads incorrect?
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Head studs
sounds like somebody modified the case
studs right heads right case wrong, big end of stud goes in case
studs right heads right case wrong, big end of stud goes in case
Re: Head studs
Ok! Thanks. The case holes have been drilled out to suit 10mm thread inserts at some time! Can the heads be drilled out to suit the 12mm thread or is that not possible?
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Head studs
I don't think that's the way you want to go, drill / helicoil or timesert the caseback to stock. or maybe just remove the thread repair that is on there now ?
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Head studs
or find another case and sent the studs back for refund, that will cost alot to put right.
Re: Head studs
The stock studs have been sent back and I've found a source for some 10mm VW studs the lengths I need.
Thanks
Brian
Thanks
Brian
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Head studs
pictures?
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Head studs
robinsbw wrote:The stock studs have been sent back and I've found a source for some 10mm VW studs the lengths I need.
Thanks
Brian
can you elaborate on the studs, where did you get them a link maybe, bigbadbob76 is in need
http://forum.club8090.co.uk/viewtopic.p ... 9&start=75" onclick="window.open(this.href);return false;
- bigbadbob76
- Registered user
- Posts: 1733
- Joined: 07 Nov 2016, 14:41
- 80-90 Mem No: 15707
- Location: Isle of Skye
Re: Head studs
oh yes please!!! I have the same problem robinsbw.
I havn't tried getting the studs or inserts out yet but if I can get double ended M10 threaded studs in the right length that would be great.
I havn't tried getting the studs or inserts out yet but if I can get double ended M10 threaded studs in the right length that would be great.
'86 1.9 DG, 4 spd, tintop, camper conversion.
Split case club member.
Split case club member.
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Head studs
Got to be an Aircooled thing me thinks.
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Head studs
Don't think so, type 4 head studs are very similar to WBX
https://www.vwheritage.com/025198143-cy ... c-vw-spare
https://www.vwheritage.com/025198143-cy ... c-vw-spare
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Head studs
Just looked it up in ETKA, air cooled head studs are M12 x 1.5 on one end, M10 on the other, same diameter as WBX ?
I think some Beetles used M10 studs, but they also had the unthreaded shank.
I think some Beetles used M10 studs, but they also had the unthreaded shank.
Last edited by 937carrera on 31 May 2018, 08:42, edited 1 time in total.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
Re: Head studs
I've looked at this site: http://www.mecatechnic.com" onclick="window.open(this.href);return false; (vw split bus) The length of studs required are: 8 x222mm,4 x 191mm,4 x175mm. on this site there are VD85627 10MMX1.5X 193MM, VD85626 10MMX1.5X 177MM and VD85629 10MM X 1.5 X 218MM.