Slave cylinder bracket
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 37
- Joined: 27 Jan 2013, 23:43
- 80-90 Mem No: 0
Slave cylinder bracket
Can anyone tell me how to fit new slave cylinder bracket in and the best way to get into it. I have a vw type 25 transporter 1987 . tia
-
- Registered user
- Posts: 37
- Joined: 27 Jan 2013, 23:43
- 80-90 Mem No: 0
Re: Slave cylinder bracket
No its still in
-
- Registered user
- Posts: 1800
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Slave cylinder bracket
Diesel or petrol?
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
Re: Slave cylinder bracket
http://forum.club8090.co.uk/viewtopic.php?f=37&t=144430" onclick="window.open(this.href);return false;
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
- Aidan
- Trader
- Posts: 6522
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Slave cylinder bracket
much easier to do with the box out, trying to get the lever arm off the end of the clutch fork shaft isn't easy, they are usually rusted on, if the box is out then you don't have to remove anything, just move the inside circlip, slide the fork out a bit sideways, remove old bracket, fit new one, push fork back in and move the circilip back into the groove, you can grease the bushes too, check the clutch and release bearing and seals
-
- Registered user
- Posts: 37
- Joined: 27 Jan 2013, 23:43
- 80-90 Mem No: 0
Re: Slave cylinder bracket
Thanks alot Aiden if your ever in Glasgow i owe you a pint.