Slave cylinder bracket

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
frankie_66
Registered user
Posts: 37
Joined: 27 Jan 2013, 23:43
80-90 Mem No: 0

Slave cylinder bracket

Post by frankie_66 »

Can anyone tell me how to fit new slave cylinder bracket in and the best way to get into it. I have a vw type 25 transporter 1987 . tia

User avatar
Aidan
Trader
Posts: 6522
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: Slave cylinder bracket

Post by Aidan »

is the gearbox out of the van ?

frankie_66
Registered user
Posts: 37
Joined: 27 Jan 2013, 23:43
80-90 Mem No: 0

Re: Slave cylinder bracket

Post by frankie_66 »

No its still in

RogerT
Registered user
Posts: 1798
Joined: 10 May 2013, 11:59
80-90 Mem No: 13706
Location: Central Scotland

Re: Slave cylinder bracket

Post by RogerT »

Diesel or petrol?
Have you ever seen an unhappy fool?

88 Transporter with hitop camper conversion, 1.6td.

User avatar
R0B
Moderator
Posts: 18852
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: Slave cylinder bracket

Post by R0B »

http://forum.club8090.co.uk/viewtopic.php?f=37&t=144430" onclick="window.open(this.href);return false; :wink:
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

User avatar
Aidan
Trader
Posts: 6522
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: Slave cylinder bracket

Post by Aidan »

much easier to do with the box out, trying to get the lever arm off the end of the clutch fork shaft isn't easy, they are usually rusted on, if the box is out then you don't have to remove anything, just move the inside circlip, slide the fork out a bit sideways, remove old bracket, fit new one, push fork back in and move the circilip back into the groove, you can grease the bushes too, check the clutch and release bearing and seals

frankie_66
Registered user
Posts: 37
Joined: 27 Jan 2013, 23:43
80-90 Mem No: 0

Re: Slave cylinder bracket

Post by frankie_66 »

Thanks alot Aiden if your ever in Glasgow i owe you a pint.

Post Reply