Fuel tank breathers question
Moderators: User administrators, Moderators
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Fuel tank breathers question
its easy to think you are an expert with a bit of googling and start modifying stuff but if you don't really understand fuel tank design best leave it alone imo.
I'm sure the design is there to cater for things you don't normally experience but you might one day.
I'm sure the design is there to cater for things you don't normally experience but you might one day.
-
- Registered user
- Posts: 857
- Joined: 21 Aug 2013, 15:01
- 80-90 Mem No: 15202
- Location: Llantwit Major, Bro Morganwg, South wales
Re: Fuel tank breathers question
Right then, Im going to do this.
Tank out. Some Bilt Hamber UB in the space, then get rid of the breather tanks.
What would you advise to blank off breather tanks pipe from tank??
I never fill the tank up to max, never have any money too
Tank out. Some Bilt Hamber UB in the space, then get rid of the breather tanks.
What would you advise to blank off breather tanks pipe from tank??
I never fill the tank up to max, never have any money too
-
- Registered user
- Posts: 1673
- Joined: 12 Oct 2005, 11:14
- 80-90 Mem No: 1342
- Location: Wolverhampton.
Re: Fuel tank breathers question
I can only say what I've done on mine so you have to decide for yourself.
If you look at the photo for reference, the metal pipes that are part of the tank I capped off with plastic 'caps' and the ones across the top of the tank I simply 'plugged' the ends .
I also run on LPG so never fill the tank up as Petrol is only a backup.
Probably 5yrs ago now so I guess I would have found a problem by now.
If you look at the photo for reference, the metal pipes that are part of the tank I capped off with plastic 'caps' and the ones across the top of the tank I simply 'plugged' the ends .
I also run on LPG so never fill the tank up as Petrol is only a backup.
Probably 5yrs ago now so I guess I would have found a problem by now.
2.1 DJ running on carb and LPG.
Re: Fuel tank breathers question
The breather tanks are also there for safety the same as the non return valve in the return hose on vans fitted with carbs that people remove "because they don't do anything". The breather tanks house the valves that close the tank off in the event that the van ends up on it's side or roof.
Before modifying any of the fuel system take a moment to think what's going to happen if you turn things up the wrong way.
Sent from my SM-G920F using Tapatalk
Before modifying any of the fuel system take a moment to think what's going to happen if you turn things up the wrong way.
Sent from my SM-G920F using Tapatalk
'89 1.9td AAZ engine
http://www.dubsonthefritz.co.uk" onclick="window.open(this.href);return false;
http://www.dubsonthefritz.co.uk" onclick="window.open(this.href);return false;
- chewbacca
- Registered user
- Posts: 578
- Joined: 10 Jan 2015, 03:30
- 80-90 Mem No: 16186
- Location: Chesterfield (ish)
Re: Fuel tank breathers question
You see, I'm still not sure on this. I have a very limited experience of fuel tanks, but all the ones I've seen just have a breather pipe out the top. Car ends up on its roof, fuel comes out.
Where are the non-return valves in the breather tanks? That makes even less sense to the breathing system. I love old cars. Lol
Where are the non-return valves in the breather tanks? That makes even less sense to the breathing system. I love old cars. Lol
B plate 1.9 petrol bus
- chewbacca
- Registered user
- Posts: 578
- Joined: 10 Jan 2015, 03:30
- 80-90 Mem No: 16186
- Location: Chesterfield (ish)
Re: Fuel tank breathers question
Incidentally, my new tank is painted and ready to go once all the grommets are in.
I've not started on the underseal yet. There's great access to the rails though, so I'm glad a got few cans of the dynax s50 for doing those while the tank is out!
Just trying to decide whether to swap the the water pipes first, or underseal first.
I've not started on the underseal yet. There's great access to the rails though, so I'm glad a got few cans of the dynax s50 for doing those while the tank is out!
Just trying to decide whether to swap the the water pipes first, or underseal first.
B plate 1.9 petrol bus
- chewbacca
- Registered user
- Posts: 578
- Joined: 10 Jan 2015, 03:30
- 80-90 Mem No: 16186
- Location: Chesterfield (ish)
Re: Fuel tank breathers question
crazyhorse wrote: What would you advise to blank off breather tanks pipe from tank??
If I do decide to bin the tanks, I'll use a bit of pipe to link the outlets that feed the breather tanks on each side, effectively blanking them off
B plate 1.9 petrol bus
Re: Fuel tank breathers question
Would VW put them there if they were not needed?
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Registered user
- Posts: 857
- Joined: 21 Aug 2013, 15:01
- 80-90 Mem No: 15202
- Location: Llantwit Major, Bro Morganwg, South wales
Re: Fuel tank breathers question
chewbacca wrote:crazyhorse wrote: What would you advise to blank off breather tanks pipe from tank??
If I do decide to bin the tanks, I'll use a bit of pipe to link the outlets that feed the breather tanks on each side, effectively blanking them off
The plan....maybe is to take the tank out. Buy 1 Can of UB, spary the hell out of that area, take breather tanks out spray the hell out of the wheel arches.
Then to the tank itself. blank off the 2 metal pipes coming from the tank, then with the 2 3 way breather hose from tank, run a small fuel hose with clips and blank them off maybe tie them down on top of the tank. Will see. I know a lot will say this is a no no, but for the amount of time I use petrol might be the way to go. Just need to figure out which pipe blanks to get
Chewbacca, keep me posted, or if anyone has any suggestions if I shouldnt do this
- chewbacca
- Registered user
- Posts: 578
- Joined: 10 Jan 2015, 03:30
- 80-90 Mem No: 16186
- Location: Chesterfield (ish)
Re: Fuel tank breathers question
I will do mate
I'm currently leaning more on leaving mine in place.
No decision yet though.
I'd splash out on can of the s50. Get the rails filled while the tank is out.
Fingers crossed I'm hitting the water pipes and underseal tomorrow night.
I'm currently leaning more on leaving mine in place.
No decision yet though.
I'd splash out on can of the s50. Get the rails filled while the tank is out.
Fingers crossed I'm hitting the water pipes and underseal tomorrow night.
B plate 1.9 petrol bus
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Fuel tank breathers question
This is the VW fuel tank test, I wonder how many would pass the test now
VW T25 rotation by Paul_Barr, on Flickr
VW T25 rotation by Paul_Barr, on Flickr
-
- Registered user
- Posts: 1673
- Joined: 12 Oct 2005, 11:14
- 80-90 Mem No: 1342
- Location: Wolverhampton.
Re: Fuel tank breathers question
Pull the pipes off and drive around for a few months, if now't happens decide then.
If your van ends up on it's roof do you really think you'll give a sh*t if your expansion tanks are connected?
If your van ends up on it's roof do you really think you'll give a sh*t if your expansion tanks are connected?
2.1 DJ running on carb and LPG.
- doowyrag
- Registered user
- Posts: 21
- Joined: 25 Jan 2012, 21:19
- 80-90 Mem No: 11162
- Location: Suffolk
- Contact:
Re: Fuel tank breathers question
Good Evening.
I’ve recently taken my tank / etc out to replace and was going to ask the same question re: the single run of rubber.
It’s seems to make sense to do this and have less connections.
Have you done yours yet, and which route did you go down?
Cheers.
I’ve recently taken my tank / etc out to replace and was going to ask the same question re: the single run of rubber.
It’s seems to make sense to do this and have less connections.
Have you done yours yet, and which route did you go down?
Cheers.
Suffolk / 1983, 1.9 wbx.
Constant lurker / occasional poster.
Constant lurker / occasional poster.
- chewbacca
- Registered user
- Posts: 578
- Joined: 10 Jan 2015, 03:30
- 80-90 Mem No: 16186
- Location: Chesterfield (ish)
Re: Fuel tank breathers question
In the end I left the rigid plastic pipes. Purchased some new metal inserts from brickwerks and cut them down by an inch on each end to ensure a good connection.
I also used a fuel filter with 6/8mm connectors on it. Saves using a reducer, so that's 1 less join.
I also used a fuel filter with 6/8mm connectors on it. Saves using a reducer, so that's 1 less join.
B plate 1.9 petrol bus