Oil filter housing
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 278
- Joined: 28 Nov 2011, 17:48
- 80-90 Mem No: 10560
- Location: Enix pueblo, Almeria, Spain
Oil filter housing
Back in the summer I had a leak from the base of the housing, new gasket and sealer bought and applied, problem was I got a bit ham handed when screwing in the oil pressure sensor, consequently stripping the thread inside!
Patched up with a bit of sealer, enough to get me back home from Scotland and has been left as other more lucrative job offers came up.
Today I decided to replace that housing with a spare I had. After removing the turbo oil feed pipe adapter from the top aperture I found out it is not an M10 which I thought it would be. The spare housing only has 2 M10 apertures. I'm not au fait with threads but the adapter I took out looks to be something like a JIC or NPT,it's a bigger diameter and coarser thread. Is that normal or do I have a frankenstien creation?
It's a 1.6 JX TD engine and normally would post pics but as you all know photobucket won't allow it, or will it now.
Basically do I have to go searching for another adaptor m10 to whatever the thread is for the oil feed pipe or will I have to get a new oil feed pipe?
Could somebody tell me what is supposed to be there in terms of standard fit please?
Cheers
Jon
PS I posted on the facebook page with pics in case anyone want's to have a look at what I'm wittering on about.
Patched up with a bit of sealer, enough to get me back home from Scotland and has been left as other more lucrative job offers came up.
Today I decided to replace that housing with a spare I had. After removing the turbo oil feed pipe adapter from the top aperture I found out it is not an M10 which I thought it would be. The spare housing only has 2 M10 apertures. I'm not au fait with threads but the adapter I took out looks to be something like a JIC or NPT,it's a bigger diameter and coarser thread. Is that normal or do I have a frankenstien creation?
It's a 1.6 JX TD engine and normally would post pics but as you all know photobucket won't allow it, or will it now.
Basically do I have to go searching for another adaptor m10 to whatever the thread is for the oil feed pipe or will I have to get a new oil feed pipe?
Could somebody tell me what is supposed to be there in terms of standard fit please?
Cheers
Jon
PS I posted on the facebook page with pics in case anyone want's to have a look at what I'm wittering on about.
'89 Westy Joker Hitop
1.6TD JX engine
1.6TD JX engine
-
- Registered user
- Posts: 798
- Joined: 15 Oct 2006, 11:19
- 80-90 Mem No: 5533
- Location: rambler de oria, near albox,almeria,spain
Re: Oil filter housing
My guess is that your replacement oil filter stand is for a non turbo engine! Does an oil sender fit both holes?
Don't Panic!
Baz.
Don't Panic!
Baz.
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
-
- Registered user
- Posts: 278
- Joined: 28 Nov 2011, 17:48
- 80-90 Mem No: 10560
- Location: Enix pueblo, Almeria, Spain
Re: Oil filter housing
Aye, can get an m10 in both top and bottom. If I could get an adapter I would be laughing.
'89 Westy Joker Hitop
1.6TD JX engine
1.6TD JX engine
-
- Registered user
- Posts: 798
- Joined: 15 Oct 2006, 11:19
- 80-90 Mem No: 5533
- Location: rambler de oria, near albox,almeria,spain
Re: Oil filter housing
What I did ( to the golf filter stand ) was to drill and tap the top sender hole!
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
-
- Registered user
- Posts: 278
- Joined: 28 Nov 2011, 17:48
- 80-90 Mem No: 10560
- Location: Enix pueblo, Almeria, Spain
-
- Registered user
- Posts: 798
- Joined: 15 Oct 2006, 11:19
- 80-90 Mem No: 5533
- Location: rambler de oria, near albox,almeria,spain
Re: Oil filter housing
Was a few years ago..I just found a die that fitted the feed pipe adaptor thingy and found a tap the same size!
Doing it made a lot of swarf....
You could borrow my old JX oil filter stand...
I'm only the other side of the mountain !!
Doing it made a lot of swarf....
You could borrow my old JX oil filter stand...
I'm only the other side of the mountain !!
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
-
- Registered user
- Posts: 278
- Joined: 28 Nov 2011, 17:48
- 80-90 Mem No: 10560
- Location: Enix pueblo, Almeria, Spain
Re: Oil filter housing
Aye, it might come to that, quite limited in the taps and dies selection but will have a look today.
Obviously I'll let you know.
Thanks for the offer
Jon
(this is all to do with the supposed enhanced ITV where they are supposed to be extra vigilant with things like oil leaks. It was just a weep and I could have probably got away with it, quick wipe down with a rag prior to entering the shed sort of thing, but I wanted to stop it weeping anyway. Never easy wit these old girls is it?!?!?!?)
Obviously I'll let you know.
Thanks for the offer
Jon
(this is all to do with the supposed enhanced ITV where they are supposed to be extra vigilant with things like oil leaks. It was just a weep and I could have probably got away with it, quick wipe down with a rag prior to entering the shed sort of thing, but I wanted to stop it weeping anyway. Never easy wit these old girls is it?!?!?!?)
'89 Westy Joker Hitop
1.6TD JX engine
1.6TD JX engine
-
- Registered user
- Posts: 798
- Joined: 15 Oct 2006, 11:19
- 80-90 Mem No: 5533
- Location: rambler de oria, near albox,almeria,spain
Re: Oil filter housing
What about a " Timesert" kit for the stripped thread,or " JB weld" the t piece in place?
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
-
- Registered user
- Posts: 278
- Joined: 28 Nov 2011, 17:48
- 80-90 Mem No: 10560
- Location: Enix pueblo, Almeria, Spain
Re: Oil filter housing
I was thinking about the 'JB weld' method but worried about clogging up the feed and not getting a viable pressure reading.
Timeserts, do they have the wire across the end? would that not also restrict the flow?
The main problem is having to do this in situ when the housing has been torqued down, which then means a PITA if you have to take it off again.
No I think I will have to either tap out the M10 hole (somehow, I don't have that size of tap) or pop over and get your old one.
Regarding that, off the top of your head, can you remember if the three securing bolts were the same length or were two shorter than the other?
I'm just sizing up a house painting job that has to be completed by end of month, apart from that I could make it to yours possibly tomorrow?
Jon
Timeserts, do they have the wire across the end? would that not also restrict the flow?
The main problem is having to do this in situ when the housing has been torqued down, which then means a PITA if you have to take it off again.
No I think I will have to either tap out the M10 hole (somehow, I don't have that size of tap) or pop over and get your old one.
Regarding that, off the top of your head, can you remember if the three securing bolts were the same length or were two shorter than the other?
I'm just sizing up a house painting job that has to be completed by end of month, apart from that I could make it to yours possibly tomorrow?
Jon
'89 Westy Joker Hitop
1.6TD JX engine
1.6TD JX engine
-
- Registered user
- Posts: 798
- Joined: 15 Oct 2006, 11:19
- 80-90 Mem No: 5533
- Location: rambler de oria, near albox,almeria,spain
Re: Oil filter housing
All I know about "Timesert" is that they are a sleeve.Helecoil have a tang that you snap off after you've wound it in.
The three bolts are the same length.
Will pm you about visit.
The three bolts are the same length.
Will pm you about visit.
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]