wishbone mount corrosion
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 46
- Joined: 09 Oct 2007, 20:32
- 80-90 Mem No: 4555
- Location: North Cornwall
wishbone mount corrosion
After a lot of squeeking from front suspension, decided to replace upper wishbone bushes. After removing the wishbones, noticed quit a bit of corrosion around where the 'sleeve' is mounted which the long bolt passes through. Has anyone else had this problem or is there a 'repair' panel available? have searched threads here and looked through suspension components on brickyard, jk etc but cant find anything
-
- Registered user
- Posts: 46
- Joined: 09 Oct 2007, 20:32
- 80-90 Mem No: 4555
- Location: North Cornwall
Re: wishbone mount corrosion
Top pic causing me concern.. other side of van is fine
-
- Trader
- Posts: 16347
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: wishbone mount corrosion
Remember that iron oxide takes up around 10x the volume of the parent metal from which it derives.
Sent from my S60 using Tapatalk
Sent from my S60 using Tapatalk
-
- Registered user
- Posts: 46
- Joined: 09 Oct 2007, 20:32
- 80-90 Mem No: 4555
- Location: North Cornwall
Re: wishbone mount corrosion
Thanks i chipped/scraped away as much of the 'iron oxide' as poss (not easy around the back using mirror/torch /chisel) anyway not as bad as i thought although metal is not quite as thick as it used to be! couple of coats of aquasteel and fitted the new wishbones.