WBXlog
Moderators: User administrators, Moderators
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: WBXlog
uninsulated I assume
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: WBXlog
Yep
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
-
- Registered user
- Posts: 2824
- Joined: 05 Oct 2012, 08:55
- 80-90 Mem No: 11974
- Location: Salisbury
Re: WBXlog
itchyfeet wrote:I'm going to try a VDO oil temp gauge as this cheapo one is not very responsive.
looking at to m10x1 sensor but what connector goes on this?
Commonly found on tractors. You thinking of converting to a JX?
Why would the glass be anything other than half full?
'89 panel van, 1.9 DG.
'89 panel van, 1.9 DG.
Re: WBXlog
A normal 6.3 mm female spade terminal (uninsulated) slides on horizontally
____________________________________________
84 CaravelleGL 1.9 DG WBX Bronze Beige Metallic auto
84 CaravelleGL 1.9 DG WBX Bronze Beige Metallic auto
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: WBXlog
Thanks
just need to make a new plate for the oil filler location then.
I can confirm resistance of vdo sensor is different to el cheapo.
just need to make a new plate for the oil filler location then.
I can confirm resistance of vdo sensor is different to el cheapo.
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: WBXlog
Sensor turned up and it has a tapered M10x1 thread, anybody seen this before?
No mention of it on their website and they show it with a washer, I asked Brickwerks and they said thay never have a washer.
I have made a plate with a standard M10x1 thread fingers crossed.
https://www.vdo-gauges.com/temperature- ... 1-9-3.html" onclick="window.open(this.href);return false;
20180723_071600 by Paul_Barr, on Flickr
20180723_125749 by Paul_Barr, on Flickr
No mention of it on their website and they show it with a washer, I asked Brickwerks and they said thay never have a washer.
I have made a plate with a standard M10x1 thread fingers crossed.
https://www.vdo-gauges.com/temperature- ... 1-9-3.html" onclick="window.open(this.href);return false;
20180723_071600 by Paul_Barr, on Flickr
20180723_125749 by Paul_Barr, on Flickr
-
- Trader
- Posts: 16347
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: WBXlog
Its a sender, not a sensor
Its a passive device, as opposed to a powered sensor that can be interrogated by the ecu diagnostics.
Sent from my S60 using Tapatalk
Its a passive device, as opposed to a powered sensor that can be interrogated by the ecu diagnostics.
Sent from my S60 using Tapatalk
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: WBXlog
silverbullet wrote:Its a sender, not a sensor
Its a passive device, as opposed to a powered sensor that can be interrogated by the ecu diagnostics.
Sent from my S60 using Tapatalk
Helpful
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: WBXlog
You might need to use some PTFE tape to help ensure that seals properly, or a dowty washer if it proves particularly problematic.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
Re: WBXlog
937carrera wrote:You might need to use some PTFE tape to help ensure that seals properly, or a dowty washer if it proves particularly problematic.
In Itchy's link to the VDO site there are a couple of downloadable documents. One of them says not to use Teflon tape, since the sender earths through the body.
The other one calls it a sensor
"I'm a man of means, by no means....King of the Road!"
1983 Viking Xplorer, 2.1DJ
1983 Viking Xplorer, 2.1DJ
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: WBXlog
CJH wrote:937carrera wrote:You might need to use some PTFE tape to help ensure that seals properly, or a dowty washer if it proves particularly problematic.
In Itchy's link to the VDO site there are a couple of downloadable documents.
One calls it a sensor
Surely VDO can't get that wrong
I saw the note on ptfe
I can only assume it will be OK but seems odd to use a taper on one thread ond not the mating thread.
- ghost123uk
- Registered user
- Posts: 6857
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Re: WBXlog
Ford oil pressure switches were like that (X-Flow engines etc). You used to just screw them in pretty tight, with a bit of red Hermatite on the thread.
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: WBXlog
CJH wrote:937carrera wrote:You might need to use some PTFE tape to help ensure that seals properly, or a dowty washer if it proves particularly problematic.
In Itchy's link to the VDO site there are a couple of downloadable documents. One of them says not to use Teflon tape, since the sender earths through the body.
The other one calls it a sensor
Doh ! of course it does, too much thinking about the fluid seal with tapered threads rather than the electrical connection. I'm pretty sure I have seen it used so the thread probably cuts through the tape to make the electrical circuit
You should use tapered threads for male and female, but as you already tapped the housing I assumed you didn't have a tapered tap.
In the automotive world it'll probably be OK, for equipment hydraulics at 10,000 psi it's a definite no -no, potentially lethal consequences. PTFE tape is being banned on many sites these days as it can be used wrongly to compensate for worn threads. You haven't got your oil pressure up to those levels yet have you itchy ?
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: WBXlog
937carrera wrote:
You should use tapered threads for male and female, but as you already tapped the housing I assumed you didn't have a tapered tap.
I could make another plate but I can't find any reference to a taper thread form for M10x1?
I have a taper and plug tap but the taper tap is just to get the thread cut less aggressively and not the same as a taper thread form
Its sump oil so no real pressure.
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: WBXlog
I was meaning a taper thread form tap. You're right though, as you say it's sump oil there's little pressure so nothing to worry about until it leaks
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine