Front castor angle

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
what2do
Registered user
Posts: 2824
Joined: 05 Oct 2012, 08:55
80-90 Mem No: 11974
Location: Salisbury

Front castor angle

Post by what2do »

Is this something that can be done on the drive or is it far too technical for that? I've replaced my front radius rod bushes with powerflex. The length of the rod has been set to the original 345 mm but I'm wondering if the different materials used for the bushes will mean that the original 345 mm will no longer be correct. Thoughts from those in the know are most welcome. Thanks in advance.
Why would the glass be anything other than half full?

'89 panel van, 1.9 DG.

Post Reply