oh well rings are done now
should be an insert in flywheel see it here, I pushed it out of this flywheel
2.1 WBX engine rebuild noob....
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 104
- Joined: 19 Nov 2013, 18:41
- 80-90 Mem No: 14562
- Location: Saaa'fend, Essex
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: 2.1 WBX engine rebuild noob....
had a look can't see a part number for it must be part of flywheel, I have one missing too from a flywheel but I have a dead flywheel so took it from there.
Looks like a thin wall tube maybe 19mm OD and 1mm wall, gearbox input shaft is 15mm dia.
I doubt it's the end of the world but if missing the felt ring could move, not sure if it's designed to keep the grease in the bearing for the bearing sake or the clutch sake, maybe both.
It is permanently pushed in you fit the felt ring before flywheel so it's trapped
Looks like a thin wall tube maybe 19mm OD and 1mm wall, gearbox input shaft is 15mm dia.
I doubt it's the end of the world but if missing the felt ring could move, not sure if it's designed to keep the grease in the bearing for the bearing sake or the clutch sake, maybe both.
It is permanently pushed in you fit the felt ring before flywheel so it's trapped
-
- Registered user
- Posts: 104
- Joined: 19 Nov 2013, 18:41
- 80-90 Mem No: 14562
- Location: Saaa'fend, Essex
Re: 2.1 WBX engine rebuild noob....
Well that's royally f'ked it......thanks Photobucket. $400 a year to fix all those broken links.........I guess that's what happens when you rely on a "free" service.