WANTED: Heater Motor/Blower and Housing

Wanted ads only - you can reply in this forum - ads deleted after 28 days.

Moderators: User administrators, Moderators

WANTED: Heater Motor/Blower and Housing

Postby catweazle » 11 Jul 2018, 08:51

Hi,

I need a heater/blower motor and the plastic housing that it sits in as my heater shorted, caught fire and melted the surround!

Cheers

Sam

1987 T25
catweazle
 
Posts: 5
Joined: 29 Jan 2013, 00:03
80-90 Mem No: 0

Re: WANTED: Heater Motor/Blower and Housing

Postby R0B » 11 Jul 2018, 08:56

The motors are cheap enough from brickwerks.Don't use a S/H one.
2.1 LPG/Petrol Auto Caravelle
User avatar
R0B
Moderator
 
Posts: 15545
Joined: 07 Oct 2005, 17:33
Location: Cheshire
80-90 Mem No: 864

Re: WANTED: Heater Motor/Blower and Housing

Postby catweazle » 11 Jul 2018, 09:04

Cheers, I'll get a new motor then :)

I still need the surround that holds it in place as the current one is melted :/

Cheers

Sam
catweazle
 
Posts: 5
Joined: 29 Jan 2013, 00:03
80-90 Mem No: 0

Re: WANTED: Heater Motor/Blower and Housing

Postby Aidan » 11 Jul 2018, 10:26

how many levers does your heater control have 3 or 4 ?
AIDAN
User avatar
Aidan
Trader
 
Posts: 4358
Joined: 11 Oct 2005, 19:21
Location: Llanfyllin, mid Wales : )
80-90 Mem No: 742

Re: WANTED: Heater Motor/Blower and Housing

Postby R0B » 11 Jul 2018, 10:38

Dont forget to order the resistors when ordering the motor.
2.1 LPG/Petrol Auto Caravelle
User avatar
R0B
Moderator
 
Posts: 15545
Joined: 07 Oct 2005, 17:33
Location: Cheshire
80-90 Mem No: 864

Re: WANTED: Heater Motor/Blower and Housing

Postby catweazle » 11 Jul 2018, 10:52

Mine has 3 levers cheers

And I've got the resistors thanks!
catweazle
 
Posts: 5
Joined: 29 Jan 2013, 00:03
80-90 Mem No: 0

Re: WANTED: Heater Motor/Blower and Housing

Postby Aidan » 12 Jul 2018, 08:13

I have a complete 3 lever heater box (with motor - untested so assume it's stuffed), case upper 251 259 109 D, lower 251 259 113 C with the two control cables for the flaps (not the valve cable) and wiring, the red black wire (live feed)has been cut about 2" before the multiblock the switch connects to, the earth wire is intact, one of the 4 lugs for the big screws that attach to the body is broken, it's from a 1986 pickup truck, is very dusty, appears to be original, ie hasn't been split before so you will need the clips to re-join top and bottom when split for the new motor and refurbishment - £40 inc courier
AIDAN
User avatar
Aidan
Trader
 
Posts: 4358
Joined: 11 Oct 2005, 19:21
Location: Llanfyllin, mid Wales : )
80-90 Mem No: 742

Re: WANTED: Heater Motor/Blower and Housing

Postby catweazle » 12 Jul 2018, 08:51

Thanks that sounds great, forgot to mention that mine is a RHD, don't know if that matters here, but the valve control cable I found is rhd only..

Found these cables and clips on Brickwerks if you are able to tell me if these are what I need.

Thanks for all your help

Sam

https://www.brickwerks.co.uk/heater-box-clip-t3.html
https://www.brickwerks.co.uk/heater-val ... 3-rhd.html
catweazle
 
Posts: 5
Joined: 29 Jan 2013, 00:03
80-90 Mem No: 0

Re: WANTED: Heater Motor/Blower and Housing

Postby Aidan » 12 Jul 2018, 09:37

Sam
those BW links look correct
I hadn't clocked that all the control cables are handed, this is from a lhd so the cables attached are lhd versions which are the longer ones, it may not be a problem using them I guess it depends on routing so I can't say for sure they will be okay, one of them will be as it can be swapped as it is the same as but for the other lever, but the short rhd one 251 711 647 A is nla, it is 435mm long, paint mark blue if visible
have you tried Mick at VW NW to see if he has the correct heater box with the rhd cables or just the short cable ? his number is 07968367046
AIDAN
User avatar
Aidan
Trader
 
Posts: 4358
Joined: 11 Oct 2005, 19:21
Location: Llanfyllin, mid Wales : )
80-90 Mem No: 742

Re: WANTED: Heater Motor/Blower and Housing

Postby catweazle » 12 Jul 2018, 09:50

I'll give him a call, thanks

Sam
catweazle
 
Posts: 5
Joined: 29 Jan 2013, 00:03
80-90 Mem No: 0

Re: WANTED: Heater Motor/Blower and Housing

Postby Aidan » 16 Jul 2018, 07:21

update
I tested the unit yesterday and the fan works fine on all three speeds and is pretty quiet, but I only tested it for a short time
AIDAN
User avatar
Aidan
Trader
 
Posts: 4358
Joined: 11 Oct 2005, 19:21
Location: Llanfyllin, mid Wales : )
80-90 Mem No: 742


Return to Wanted

Who is online

Users browsing this forum: No registered users and 2 guests