AAZ conversion (what bits are required)

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
gollfy
Registered user
Posts: 50
Joined: 21 Feb 2011, 08:48
80-90 Mem No: 14123
Location: Mansfield, Nottinghamshire

AAZ conversion (what bits are required)

Post by gollfy »

Hi All,
I have an aaz engine and box for my van.

What other bits and bobs am I going to need to complete the conversion? I have done some searching and I presume I need a JX sump?

Cheers

jas915
Registered user
Posts: 228
Joined: 08 Oct 2007, 18:27
80-90 Mem No: 6242
Location: Cupar, Fife Scotland

Re: AAZ conversion (what bits are required)

Post by jas915 »

Depends what engine you have now in the van.to fit aaz needs alot of the jx bits.its easy swap if its a jx or at least a diesel already.think there is a compressive list and instruction on brickworks site
Grey/white high top, AAZ.

clone123
Registered user
Posts: 492
Joined: 30 Oct 2015, 22:05
80-90 Mem No: 0
Location: Manchester

Re: AAZ conversion (what bits are required)

Post by clone123 »

Have a read here see if it helps http://forum.club8090.co.uk/viewtopic.php?f=12&t=194" onclick="window.open(this.href);return false;
1985 RHD T25 hightop camper 1.9td 1Y engine
It's always easier with a friend

Post Reply