VW PD105 smoke MOT fail
Moderators: User administrators, Moderators
-
- Trader
- Posts: 2593
- Joined: 27 May 2009, 18:56
- 80-90 Mem No: 16628
- Location: hayling island
Re: VW PD105 smoke MOT fail
diesels really need to be driven hard to get fully up to working temperature, they wont achieve this by leaving it running on the drive not matter how long it runs for, drive It on the motorway for a while and keep the revs up, drive in a lower gear, take it for a good 30 minute drive then present it for mot , 99.99% of the time they pass
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: VW PD105 smoke MOT fail
davidoft1 wrote:diesels really need to be driven hard to get fully up to working temperature, they wont achieve this by leaving it running on the drive not matter how long it runs for, drive It on the motorway for a while and keep the revs up, drive in a lower gear, take it for a good 30 minute drive then present it for mot , 99.99% of the time they pass
That will be why I see so many belching stinking diesels then
-
- Registered user
- Posts: 1810
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: VW PD105 smoke MOT fail
Dealer found no issues and tested the smoke at 0.42
So it’s a win for the lead footed Italian in the driving seat. Have booked MOT with the dealer so it gets tested on the same machine, and I’ll run it up to temp first.
Thanks for the support everyone
So it’s a win for the lead footed Italian in the driving seat. Have booked MOT with the dealer so it gets tested on the same machine, and I’ll run it up to temp first.
Thanks for the support everyone
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
-
- Registered user
- Posts: 303
- Joined: 05 Jun 2014, 12:49
- 80-90 Mem No: 14187
- Location: Shipton Under Wychwood
Re: VW PD105 smoke MOT fail
ash1293 wrote:Timburrows wrote:Your diesel is now tested according to the figure in the bottom right hand corner of the black transfer vin plate,it will have a figure of something like1.2 in a square box.if it has been damaged or painted over when repairing damage then the test will revert to 2.5 for a diesel and 3.0 for a turbo diesel.
Just incase anyone else is reading the above - as far as I can tell it only became compulsory to have this on the vin plate from 2008, before that it appears to be hit or miss depending on manufacturer. A quick look on my late 2007 Peugeot 307sw suggests its not there so under the rules mine only needs to be under 3.0.
My 1.9 td t4 had a figure of 1.1 and was built in 1997 and the tester said if it was present that's what it would be tested to,1998 Passat with 294000 miles passed at 1.23 and had 1.2 on that sticker which also appeared to be damaged,still on original injectors