AAZ vacuum hoses

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
davegeezzer008
Registered user
Posts: 86
Joined: 19 Jul 2008, 15:56
80-90 Mem No: 7244
Location: Crantock cornwall

AAZ vacuum hoses

Post by davegeezzer008 »

Hi guys just finishing off installing my AAZ but I need some help please !

On the original feed pipe from the vacuum pump I’ve got a one way valve then two 3mm male tails where do these go ? Turbo ? the vacuum from the top of the LDA to go to the inlet manifold but there is another 3mm banjo on the bottom of the LDA ( rubber banjo) where does this go ?
Thanks in advance Dave

User avatar
Oldiebut goodie
Registered user
Posts: 7243
Joined: 18 Apr 2008, 01:19
80-90 Mem No: 11135
Location: Eastern Angle

Re: AAZ vacuum hoses

Post by Oldiebut goodie »

EGR valve? Just thinking that my 1Y had one there.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶

davegeezzer008
Registered user
Posts: 86
Joined: 19 Jul 2008, 15:56
80-90 Mem No: 7244
Location: Crantock cornwall

Re: AAZ vacuum hoses

Post by davegeezzer008 »

Oldiebut goodie wrote:EGR valve? Just thinking that my 1Y had one there.
Ahh yes that would account for one of them !! Think I’ve been a bit blinkered as to what I’ve got now as to what was there before lol. Thank you

User avatar
Oldiebut goodie
Registered user
Posts: 7243
Joined: 18 Apr 2008, 01:19
80-90 Mem No: 11135
Location: Eastern Angle

Re: AAZ vacuum hoses

Post by Oldiebut goodie »

I opened the bonnet to look at the engine on my new van and quickly shut it! No way am I going to attempt to work on one of these modern engines, You can hardly get your hand down the side of the engine anywhere let alone identify which bits are what.
Good job I am keeping the old van so that I have something that I can work on and understand.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶

davegeezzer008
Registered user
Posts: 86
Joined: 19 Jul 2008, 15:56
80-90 Mem No: 7244
Location: Crantock cornwall

Re: AAZ vacuum hoses

Post by davegeezzer008 »

Oldiebut goodie wrote:I opened the bonnet to look at the engine on my new van and quickly shut it! No way am I going to attempt to work on one of these modern engines, You can hardly get your hand down the side of the engine anywhere let alone identify which bits are what.
Good job I am keeping the old van so that I have something that I can work on and understand.
Totally agree ! Anything with a ECU forget it lol ! That’s why I thought AAZ instead of TDi

Post Reply