Bad day at the office

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
silverbullet
Trader
Posts: 16302
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Bad day at the office

Post by silverbullet »

In a rush, had a case bored for 98mm and ultrasonic cleaned without a proper inspection.

Cleaning exposed:
1. A Timesert
2. An oversize M14 repair stud
3. A rotten oil drilling plug
4. Some pitted studs. One of which didnt want to play, even with heat...

1 & 2 mean very marginal sealing for the barrel O-rings and could result in a warranty claim, 3 is very sketchy anyway and 4 was the final straw. Its scrap.

Start again...ImageImageImage

Sent from my S60 using Tapatalk

User avatar
ajsimmo
Trader
Posts: 2697
Joined: 23 Mar 2009, 14:06
80-90 Mem No: 6542
Location: Isle of Arran
Contact:

Re: Bad day at the office

Post by ajsimmo »

Oh dear, I feel your pain, Ian!
On the brighter side, at least you hadn't built it, only to find a head stud pulling out of a dodgy helicoil at the 50Nm stage. Grrrr!!!
I now test torque an old head onto empty barrels before I start the build.

Sent from my ONEPLUS A3003 using Tapatalk
The Campershack - (website paused)
WBX Rebuilds & Upgrades from the beautiful Isle of Arran

silverbullet
Trader
Posts: 16302
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: Bad day at the office

Post by silverbullet »

Don't know how i missed the Timsert, should have been obvious...never seen one of those oversize thread studs either. Aircooled?

Sent from my S60 using Tapatalk

User avatar
ajsimmo
Trader
Posts: 2697
Joined: 23 Mar 2009, 14:06
80-90 Mem No: 6542
Location: Isle of Arran
Contact:

Re: Bad day at the office

Post by ajsimmo »

silverbullet wrote:.never seen one of those oversize thread studs either. Aircooled?

Almost certainly a lawnmower stud.

Sent from my ONEPLUS A3003 using Tapatalk
The Campershack - (website paused)
WBX Rebuilds & Upgrades from the beautiful Isle of Arran

User avatar
sarran1955
Registered user
Posts: 1438
Joined: 11 Mar 2009, 18:51
80-90 Mem No: 6754
Location: 6, les Hauts de Sarran 19800, Sarran ,Limousin ,FRANCE

Re: Bad day at the office

Post by sarran1955 »

Hello,
ajsimmo wrote:
silverbullet wrote:.never seen one of those oversize thread studs either. Aircooled?

Almost certainly a lawnmower stud.

Sent from my ONEPLUS A3003 using Tapatalk

So almost certainly air-cooled... :)

Cordialement,

:ok
Image

Post Reply