its a 92 engine with 120k on it - saw it running before i pulled it from the donor car.multisi wrote:Matt has an ej20 and has no exhaust ! What year is your ej22 ? Have you checked if the rad is getting hot after a good run and loosen the rad bleed screw to see if its bled. You don't need a reader for the error codes, just plug the connectors together that rjes tagged for error code read and turn ignition to first position only, then look at the light that rjes installed and if there is an error, count the long and short flashes.
the fans kick in when it gets hot so must be warming up at the front? I do need to bleed to properly tho. Ive got two errors, I counted the flashes:
51 - Neutral switch - Abnormal signal entered from neutral switch
51 - Inhibitor switch - Abnormal signal entered from inhibitor switch
33 - Vehicle speed sensor - Abnormal voltage input entered from vehicle speed sensor
now the stat is out the bypass pipe is about 80 deg so 25 deg cooler but sounds like I shouldnt be running it out - Ive def got air in there still though after taking the stat out, I lost about 5l and couldnt get it back in - driveway is on a slope and front was lower than back.