Diesel Engine Bar fitting to non diesel

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
bmouthboyo
Registered user
Posts: 428
Joined: 29 Apr 2009, 17:11
80-90 Mem No: 9396
Location: Bournemouth

Diesel Engine Bar fitting to non diesel

Post by bmouthboyo »

Seems the old past conversion in my van has not had the top bolt on the carrier support bolted to anything.
Does anyone know what needs to be added to allow this to bolt up or if it really even needs it? Is it a part I can buy or need to be fabricated?
1983 Autosleeper Trooper - 1.8 Gti Conversion

colinthefox
Registered user
Posts: 858
Joined: 20 Oct 2009, 18:42
80-90 Mem No: 16447
Location: Somerset
Contact:

Re: Diesel Engine Bar fitting to non diesel

Post by colinthefox »

Mines an original diesel and hasn't got the top bolt either,
1.9D (AEF) pop-top. Aaaaahhhhh........that's better.
Image

Smcknighty
Registered user
Posts: 998
Joined: 24 Jul 2012, 20:40
80-90 Mem No: 14436
Location: West Sussex

Re: Diesel Engine Bar fitting to non diesel

Post by Smcknighty »

What top bolt??


Sent from my iPhone using Tapatalk

User avatar
Titus A Duxass
Registered user
Posts: 5778
Joined: 24 Nov 2007, 08:22
80-90 Mem No: 4475
Location: Cologne

Re: Diesel Engine Bar fitting to non diesel

Post by Titus A Duxass »

I welded the plates on and fitted the third nut and bolt.

My Pritsche which was a diesel only has two bolts fitted.
VW T3 GTi Camper 2,0l

Post Reply