T3 Multivan TDi Help

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
T3Portugal
Registered user
Posts: 4
Joined: 30 Jul 2018, 15:40
80-90 Mem No: 0

T3 Multivan TDi Help

Post by T3Portugal »

Hello Guys! Im bruno From Portugal.

Im the admin of the T3 portugal Club.

im trying to do a swap in my T3, with a AFN engine from a B4 passat, but i have some problems with the wiring loom.

Can i have some help here?

Best regards

User avatar
syncroandy
Trader
Posts: 1857
Joined: 18 Oct 2005, 18:15
80-90 Mem No: 851
Location: North Lancs. UK
Contact:

Re: T3 Multivan TDi Help

Post by syncroandy »

Hi, and welcome to 8090.

What do you need to know ? The Passat harness is quite a nice one to use for an engine-swap.
Syncrosport
Volkswagen Transporter, reloaded.

252 GC5 EJ25 AAN L90D
246 097 AFN AVL+ L90D
Syncronaut #004

T3Portugal
Registered user
Posts: 4
Joined: 30 Jul 2018, 15:40
80-90 Mem No: 0

Re: T3 Multivan TDi Help

Post by T3Portugal »

hello friend.

Im making my own wiring.

I have some doubts in the relays.

I think i have 2 relays for good working.. No?

103 and 109.
Attachments
relay109_2.jpg
relay109_2.jpg (50.29 KiB) Viewed 2631 times
Relay103_2.jpg
Relay103_2.jpg (43.92 KiB) Viewed 2631 times

T3Portugal
Registered user
Posts: 4
Joined: 30 Jul 2018, 15:40
80-90 Mem No: 0

Re: T3 Multivan TDi Help

Post by T3Portugal »

and the wires from the pedals?

i put the wires to ground?

User avatar
syncroandy
Trader
Posts: 1857
Joined: 18 Oct 2005, 18:15
80-90 Mem No: 851
Location: North Lancs. UK
Contact:

Re: T3 Multivan TDi Help

Post by syncroandy »

Hi, yes you just need J317 & J52, plus also a 5-pin relay for the brake signals (see below).

I have the 96 Passat AHU wiring diagram, the AFN will be the same wiring:
http://syncrosport.com/info/wiring/96_Passat_AHU_3
http://syncrosport.com/info/wiring/96_Passat_AHU_4
http://syncrosport.com/info/wiring/96_Passat_AHU_5
http://syncrosport.com/info/wiring/96_Passat_AHU_6

For switches, you should fit the F36 clutch switch, as this makes nicer gear changes.
For the two brake switch inputs to the ECU, I always use a relay:

Image

'F' goes to the ECU T68/44 (black/red) and the brake lamp wire (T3: black/red)
'F47' goes to the ECU T68/20 (white/yellow)
'F36' clutch switch (white/red) must switch to *sender earth* (brown/blue or brown/white) *not* chassis earth
Syncrosport
Volkswagen Transporter, reloaded.

252 GC5 EJ25 AAN L90D
246 097 AFN AVL+ L90D
Syncronaut #004

T3Portugal
Registered user
Posts: 4
Joined: 30 Jul 2018, 15:40
80-90 Mem No: 0

Re: T3 Multivan TDi Help

Post by T3Portugal »

Hello Guys. Engine now works fine.

Thanks a lot


But now i have two Problems.

1- No rpm in Tacho. i try the blue wire from alternator and nothing appens.

2- No Water Temp in tacho. I trey with the yellow red wire.

Can somebody help me?

Post Reply