DX Won't idle after cambelt change

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: Moderators, User administrators

DX Won't idle after cambelt change

Postby Theclash » 06 Jan 2018, 23:54

For your rocker cover problem you need to change the studs when fitting rubber gasket Can't remember if it's with or without collar but that will be why it's leaking ,I'm not familiar with dx more PB engine which is basically electronic version of dx and I would say it looks set up correctly although on the PB there are 2 marks on flywheel first is 6 degrees btdc and second tdc when setting ignition timing on PB it has to be set at 6 btdc I don't know setting for dx but that would be my first port of call to check
Posts: 163
Joined: 16 Oct 2013, 18:29
Location: Manchester
80-90 Mem No: 14346

Return to T25 Alternative Engine Forum

Who is online

Users browsing this forum: No registered users and 20 guests