Temperature gauge not working

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Temperature gauge not working

Postby sandyman » 14 Oct 2017, 21:09

Since fitting an aaz into my T25 the temp gauge has never really worked- it's only ever registered a tiny bit. To someone who didn't know it seems as though the needle doesn't move at all. That is until one day, while running the van to check all was fine with a newly-installed water pump, the needle suddenly shot up to max and the red warning light came on...I thought the worst! Pulled up immediately by the side of the road, looked into a very hot engine bay to discover one of the coolant hoses had split. After all that was fixed, the temp gauge magically started working! What's more, whereas before the glow plug lights never went off, now they were functioning normally. Sadly, the working gauge didn't last and am back to square one- always with the fear that I won't get any warning if she decides to start overheating! Please help!!
sandyman
 
Posts: 11
Joined: 14 Mar 2010, 22:05

Return to T25 Alternative Engine Forum

Who is online

Users browsing this forum: No registered users and 27 guests