Help!!! New oil pump binding when fitting on aaz???

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
wolfbus.uk
Registered user
Posts: 362
Joined: 21 Dec 2014, 18:34
80-90 Mem No: 0

Help!!! New oil pump binding when fitting on aaz???

Post by wolfbus.uk »

The new oil pump I have from Brickwerks turns freely on the bench but when lightly tightened into the aaz block(not in vehicle yet) becomes quite tight to turn (turning it with the vacuum out). It seems the large screws are clamping the pump casing slightly against something inside casing. It still moves just not as freely with the fitting bolts out. Is this normal and will it free up with wear? Or could this be a faulty pump? It's a JP group pump BTW.
Cheers

randolph57
Registered user
Posts: 94
Joined: 15 Aug 2008, 13:40
80-90 Mem No: 5801
Location: Plymouth

Re: Help!!! New oil pump binding when fitting on aaz???

Post by randolph57 »

Hard to diagnose without seeing i the flesh so to speak. Are you sure the pump drive is correctly located in drive slot before tightening bolts?
A visual check against the old pump would be the place to start measuring shaft length :shock: etc against one another. These pumps should fit all variants of diesel as well as the TDI variants (AHU 1Z afn etc)

wolfbus.uk
Registered user
Posts: 362
Joined: 21 Dec 2014, 18:34
80-90 Mem No: 0

Re: Help!!! New oil pump binding when fitting on aaz???

Post by wolfbus.uk »

Thanks for the advice, yes it's pretty difficult to describe too!

User avatar
Aidan
Trader
Posts: 6522
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: Help!!! New oil pump binding when fitting on aaz???

Post by Aidan »

could it be the old seal in the block ? there's a dowel as well
use the JX bolts which should be 75mm long

wolfbus.uk
Registered user
Posts: 362
Joined: 21 Dec 2014, 18:34
80-90 Mem No: 0

Re: Help!!! New oil pump binding when fitting on aaz???

Post by wolfbus.uk »

Thanks Aiden, I'll check. Good advice ta!

wolfbus.uk
Registered user
Posts: 362
Joined: 21 Dec 2014, 18:34
80-90 Mem No: 0

Re: Help!!! New oil pump binding when fitting on aaz???

Post by wolfbus.uk »

Failing that workin, I think my mechanic was going to just do it up and see how it runs. Its not jamming just you can feel it rubbing more tightly at certain positions as it's rotating

Post Reply